How to wash latex paint

latex paint - it is a very popular material for repair.It is water repellent and gives the surface a nice matte finish.Especially popular this type of covering for ceilings, as perfectly replaces usual whitewash, easy to clean and does not require special care.In addition, water-based paint coating will cost relatively not expensive, and the color is chosen independently with the help of special callers.

Do I need to wash latex paint

If the coat of paint on the walls and ceiling kept tight, there is no peeling or areas where paint is kept is not very good, then wash itnot necessary.In this case, a fresh layer of paint applied over the old one.Previously removed from the wall of debris and dust, dried and ground.Priming creates a high-quality adhesive layer, which precisely and accurately lay down new covering.Primers are not divided into several different types based on, for water-based paints using acrylic.

If the old paint layers are not held tightly disappear in many places formed bubbles, it is necessary to wash off the paint.Also, latex paint is removed in the event that if you plan to major repairs or the surface is covered with another type of materials that are incompatible with vodoemulsionkoy.

Another case that requires the removal of old layers of paint - repainting the room in a different tone.If the color of the walls or ceiling coverings darker than the one that is planned to apply, it must be removed.Darker colors are showing through the light, no matter how many layers of paint was not imposed from above.How to remove paint from the walls, discussed below.

As rinse water-based paints with water

To remove from the walls and ceiling latex paint you need patience and some tools:

1. to work on the ceiling or high walls need a stepladder or a high and stable stool.
2. wide spatula with a metal base.
3. roller with a long handle.
4. cuvette or pelvis.
5. brush with bristles made of metal.
6. plastic film or paper.
7. glasses and respirator.

with water-based coating on the walls and the ceiling is water-resistant and not waterproof.In the first case, the wiping method is slightly more complicated, and it will be described below.For nevodostoykogo cover fits the following method:

1. closes all surface and located in the premises of newspapers or film furniture.
2. bodies of breath and in performing the work of a person protected by glasses and respirator.
3. The container is poured warm water.
4. moistened in water cushion and conduct them on a layer of coating that must be removed.
5. ppokrytie Leave to soak for 10-15 minutes.
6. Take off the softened paint from the walls with a spatula.
7. If paint in some areas can not be, it is necessary once again to moisten with water or remove this area brush with metal bristles.

When applying water to the paint does not need watering once the wall or ceiling, as it is their turn to the removal of paint, coating already cease to be soft.Sprinkling must be small areas and so to move across the wall.

As rinse water-based paint thermal and mechanical method

There is a simple and effective way to remove latex paint from the walls and ceiling, but it provides for specialized tools.In the first case, this is done using a drill with a sanding attachment, in the second - Construction hairdryer.

sanding attachment for drills is a round brush with metal bristles.For sale is a supplement for the tool in any shop of building and household materials.With this nozzle is removed thick layers of paint, waterproof coating, which is not amenable to the usual wash.This is the advantage of using a drill.Disadvantage - during work, a large amount of dust.Also used for paint removal sander.

thermal method - the removal of the coating with a special construction dryer.This device works on the principle of home hair dryer, but the air stream released by them, has a higher temperature.This device heated a small dye lots, they crack and moving away from the base.Then warmed coating is easily removed with a spatula.

After work a hairdryer, the entire surface again thoroughly scan and trimmed to the places where there were traces of paint.Usually, there are small areas of thin layers of paint, these defects removed with sandpaper or wire brush.Next, the surface is thoroughly washed or vacuumed to remove the precipitated dust on it.Thermal method for removing paint suitable for thick layers of paint and water-resistant coatings.It has only one drawback - the need to purchase the building dryer.

How to wash waterproof paint

1. surface is often not covered by ordinary vodoemulsionkoy and waterproof paint, which can not be remover water.Very often it is used in bathrooms, toilets and kitchens - in high humidity areas.To determine color fastness to water is very simple - treat it with warm water and leave for 10 minutes, if the paint is beginning to move away from the base at the end of this time, it is water-resistant and to remove the need to use other methods.
2. To remove waterproof paint used a stiff brush with metal teeth.This tool thoroughly clean off the top layers of paint, trying to keep a large number of scratches on it.These scratches penetrate moisture and soften the paint.When the entire surface of the brush scratched, it is necessary to drench warm water and leave for 10 minutes.This operation is carried out several times - is applied to the water and allowed to paint a well-soaked and swollen.Required during the procedure well ventilated room, it will accelerate the discharge of paint from the surface.Complete this process of removing the paint ordinary trowel, taking them all the layers.
3. Effective for removing water-resistant adhesive for paint or wallpaper paste normal.It is applied on old paint and any unnecessary tissue paper.Sizing very carefully, so that the paper firmly stuck to the paint.Next, the surface is left to dry.When the glue is dry, the paper is removed, hooking a spatula.At the same time with it easily comes off a coat of paint.After completing work closely ceiling view and delete the places that were paint patches.

Two ways have been described above - the thermal and mechanical, using a hair dryer or a building drills.Each of these methods is effective, a choice must be made only based on the availability of various instruments and materials.

Other methods of removing the water-based paint

1. Another answer to the question "than water-based paints wash off" - to use a variety of chemical additives, special or ordinary household supplies.For example, if you add a bucket of water 200 ml of iodine, then remove the paint will be much easier:

• removed with water-based coating using a soap solution.It is applied to the surface with a brush or paint smeared lather, then wash off with a rag. few tips:
• if the coating on acrylic base, then added to the soap solution of salicylic acid or a vodka as the alcohol dissolves polyacryl;
• if the coating has a latex admixture, it is poured into water dihloretan or chloroform.

These additives produce large quantities of toxic substances, therefore it is necessary to use a respirator, and the room thoroughly aired during the whole of the work.

2. Another easy way to get rid of old layers of paint - to hide it behind panels or ceiling.Modern building systems eliminate the need to wash the walls to give them a fresh look.Another progressive method of getting rid of old coatings - paints shredder.It is a gelatinous mass, which is applied to a small area of ​​washable paint, waiting for the specified time in the instructions, wipe with solvent 646 and then scraped off.This method is convenient absence of dust during the work, but the execution takes a long time.

3. Alternative paint destroyers - removers.The composition of these agents a large number of solvent-based dimetilhlorida, formic acid, isopropyl alcohol or other organic substances.They are absolutely safe for health and the environment, as completely decomposed in a short time.Surface of 5 m2 on average requires 1 liter substance.Washes are effective and long-standing surfaces in several layers, and water-resistant paints.

Means for washing latex paint

number of countries and brands offer customers wash with water-based paint.But not all of them are worth to buy and use in their homes.Some tools are composed of harmful substances such as hydrochloric acid.They are effective for the removal of paint, but will cause significant damage to human health.You must read carefully the composition with the purchase of such funds.In general, there are two products:

1. Set Boya Sokucu (Battle Network) from Marshall Boy (Boy Marshal) Turkey.This product effectively softens and removes all types of water-based paints.It is used on concrete fundamentals, wood and metal.It prohibited for use on plastic substrates.The composition of the funds has an interesting combination of different organic substances, because it is as much in the work as safe for health.Application is as follows - a means is applied to the paint is left for 15 minutes and then remove the coating with a spatula.Finishing walls carried cellulose solvent.
2. Remover Paint "Manor".It has a gelatinous structure, suitable for removal of all types of water-based paint from wood, concrete and metal, but is not suitable for plastics.During operation, a pair of substances are released in the minimum quantities that are safe for humans.It softens the paint for 10 minutes.Surface finish is carried out by any degreasing agent.

How to Clean water-based paint from the waste

During repairs, there are situations where fresh bank littered with paint appeared and spoiled or debris fell on a fresh coat of paint.Often this happens because of poor waste disposal and dust after flushing the old layers of paint.In this case, do not have to buy a new jar of paint or cover the wall of the new coating layer, there is a way to remedy the situation without such global action.

1. littered If there was a new paint bank, then all of the particles need to be addressed.Large chunks taken out of the hands of paint or improvised means.Medium sized debris was removed with a sieve - through the paint missing.It avoids using littered with paint, since all particles trapped in it will spoil the appearance of the coating and violate its integrity, which will reduce the service life.
2. If mixed paint of different colors, then start them thoroughly.Then select the correct tinting agent, and gradually added to the tainted paint, to return to her original tone.This operation is performed only if a paint mixed type.If, however, the jar with acrylic or polyvinyl acetate vodoemulsionkoy hit, especially oil-based paint, it is considered to be irreversibly spoiled.
3. most unpleasant situation - the trash was on a fresh coat of paint.In this case it gently scraped off and fine sandpaper is applied another layer of paint.In case of contact with large and very visible dirt, you must apply the paint again.To avoid this unpleasant situation, you need to qualitatively carry out preparatory work to run off the old coating from the surface, rinse the wall after removing the paint or wallpaper and carefully wipe it with a cloth.To clean the walls before painting or the effective ordinary washing vacuum cleaner.