Build Daily

Types Of Jobs

August 12, 2017 18:08

Textured plaster - application of technology with their own hands

click fraud protection

As used textured plaster - technology application

Despite this, many a stereotype that the stucco is extremely unreliable manner walls, in fact, properly applied makeup can be kept for decades, and even centuries.A striking example - the Egyptian pyramids, in the hallways which keeps plaster on the walls and ceiling of the present.However, there is a conventional structure, it is somewhat different from the textured - application to video technology, for example, also appears, but the mixture contains further additives that provide the coating characteristic roughness.

What is the difference of texture options?Start with the fact that it is non-uniform mixture, in contrast to the usual weight. When applying you do not need to form a relief surface of the wall structure is created using a mixture of grains included in the marble and granite .Otherwise standard components - gypsum, lime or cement as binders and sand components playing a role filler.

With this plaster can create virtually any simulation of relief surfaces, such as straw or wood binding, which has worked over the bark beetle.In order to get a quality textured finish, you need a special roller, you can also use a vacuum cleaner, and sometimes confine and trowel.In some cases it is sufficient to apply the spraying method, leaving the outcome of its activities without any significant changes.

Application textured plaster - how to avoid difficulties?

Before talking about how to make and apply textured plaster, I would like to reveal to you some secrets that, in the course of work you do not have to correct the admitted flaws.So, to start the internal work with textured plaster.To plaster walls in the room looked organically, and, at the same time, they did not seem rough terrain, it is best to use uncalibrated fine grain pellets.In the absence of other options allowed the use of a mixed grain, the main thing that faction were not too large.

sure to read everything that is written on the packaging with the dry mix, as there often is referred to and the type of primer that is most appropriate for the acquisition was you.

about how to implement the application of textured plasters, there are many video training materials, but, in essence, if you are able to cover the walls of conventional cement-sand composition, it means, and other mixtures can work.And not only smokers, but also on the outside of the house.And just outside of work relating to the following little secret.To the roughness of the walls was a homogeneous, choose makeup with calibrated grains of marble and granite.And if you work with large fractions, use a steel trowel, but does not roll.

What are the methods of applying textured plaster?

easiest for walls using special pumping stations, but this technique applying textured plaster requires certain financial investments, since devices need to buy or rent.You can do a vacuum cleaner, powerful enough to serve under the pressure of the mixture with the mixed fractions.

In any case, for the machining of the walls, use fine-grained compounds, they obtained the most liquid and therefore better suited for spraying.There are also other ways of applying textured plaster requires certain effort.As mentioned earlier, if present in a mixture of coarse grains, the best work of pregnant trowel.The layer applied weight must not exceed the value of fractions, the only way to achieve significant surface topography.

compositions with mixed grains of different sizes can be applied, not only blowing through the nozzle of a plaster unit, but also the usual roller, and trowel for use there.Fine-grained solution and rolled along the surface using a special roller, trowel here it is impossible to work because of excessive fluid consistency.

instagram viewer