All year round in the country or how to make high-quality heating attic ?

are many ways how to choose?

Before you begin to develop a system of heating, attic to be well and properly insulate.Then there are several options:

• If the home already have a working heating system, you can mount it to additional tubes and batteries.In this case, if the pump is weak, then it must be replaced by a more powerful, so that it cope with the increased workload;
• With air heating the house to the main road, you can connect additional air ducts, which are displayed on the attic;
• Another way - this is the good old heating electrical appliances;
• And the most attractive option for many is to install a fireplace.He has a good record of efficacy and safety, but will always ensure that there is a solid fuel that adds extra chores.

However, the most appropriate solution would be to establish an autonomous heating system.How to heat the attic?This requires heating system itself, which consists of a boiler, the system output and the combustion air supply radiator pipe and pumping equipment.If the home is connected to a central gas heating, the boiler is working on it.If not, then the boiler can be powered by electricity, liquid or solid fuels.

Note!If sufficient power boiler, the heating of the attic floor can be made from it, but if a weak pot, then on the floor is installed independent heating system.

Important moments in calculations

Thermal calculation of the attic should include not only the ways of its insulation, placement of furniture and windows, but also thinking through the place where the boiler or fireplace, exhaust pipe system, the possible deployment of fuel will be installed.The boiler and a fireplace can be connected to a common chimney system or consider a separate outlet for the smoke and fumes.

The important point is to plan the type of ventilation.It can be natural or forced air circulation.The first method has the advantage, because they do not need to install the pump, which will save money on electricity bills.The disadvantages can be considered a large-diameter pipes, strict adherence to all the biases of the system and the inability to use many modern materials.In this connection, it is recommended to do so that the heating circuit with attic houses were forced ventilation.

Important!Identify ways of circulation, it is necessary to choose the right type of boiler, because not all of them can work with both types of circulation.

Another important point is the correct choice of wiring pipes.High-quality layout will serve as the optimal allocation and use of the heat generated by the boiler.The best option is considered to be a two-pipe forced circulation circuit.In this system, a crucial role is played by the pump, which circulates the air.

Heating attic with a fireplace

so as to heat the attic?It is not always a large selection of options.So, if it's country house, then do an autonomous heating system will be expensive, and less efficient electric heaters.In this case, the best option would be to make a fire in the attic.

Solving the fireplace, you need to understand that the heater is heavy, so you may have to strengthen the floor in the place of its installation.Its weight, in many respects, will affect the intensity of the heat, in fact, than it is usually carried out, the greater the furnace needs to be done, and, consequently, weight increase.With intensive heating furnace can be made with metal pipes, which will reduce the pressure on the floor.For attic it is considered an ideal lightweight chimney with a light pipe design.

Note!If possible, it is possible to set the electric heater because it is safer and easier to install much simpler to operate. fireplace can choose any, be it on logs or coal.However, its design must be performed so that it was combined with a common ventilation system.When heating is best used hornbeam, beech, oak, as they produce the greatest amount of heat energy.Also effective briquettes based on wood waste.