How to connect the dishwasher : a step by step instruction

Phased installation

1. Stage installation of power supply and the necessary outlet for the device.
2. preparation phase of water and feed to it.
3. Phase connection to the sewer drain.
4. Phase control of the device for washing dishes.

Below is a diagram for the connection of machines to the above mandatory elements.The order of installation is determined arbitrarily, but each successive action should be disassembled into components.

Electrical connection

first thing you need to connect any electrical appliance, including dishwasher, is to include it in the socket, which is prepared in advance.In the absence of this new device to provide power only due to the extra effort.

Each installation must meet a number of safety rules:

1. not be used to connect tees and extension cords, as they can cause damage and fire the device due to its high power.
2. should not be used to connect the socket on the electric stove.
3. necessary to draw a wire with a diameter of 2 mm from the electrical outlet to the site.In turn, the automatic shutdown of electricity in excess of the load in the electrical safety switch provides 16 A.
4. Before you connect the dishwasher is very important to ensure grounding device.To do this, use a three-wire cable to take stock of the outlet.You can not ground the electrical items on the gas supply and water supply, as it can be life threatening.

How to bring water?

for water supply to the dishwasher requires a special challenge.

Connect the water to the unit must be in the following sequence:

• to divert water to the machine set a filter that should delay the sand and rust.
• Then you need to install the shut-off valve upstream of the filter, which will resist leakage.Also, it will be protected from the ingress of water, which often leads to flooding of the lower floors and apartments.

not to close the shut-off valve after each premineniya can use the system Aqua Control and Aqua-Stop.They will resist the ingress of fluid into the system and prevent the effects that cause damage and flooding.

• kit includes a dishwasher hoses of different lengths, which can be extended with the help of the segments if necessary.
• Oddly, but only some devices can be connected to a hot water supply.Saving energy in this case is provided.

to Russian homes to connect to hot water centralized water supply system is not necessary to produce, due to the harmful additives which are composed of water, which prevent the formation of rust.This adversely affects the efficiency of the device.

control device operation How to connect the dishwasher according to the rules of good health?Any control of the connection of the dishwasher includes its connection to water and sanitation, and then divorced launch device, in which the check:

1. How quickly poured water into the device;
2. As the water heats, he entered into;
3. What modes of drying washed dishes device supports.

recommended not to check the machine modes with elements placed inside dishes, but be sure to apply a means for washing and recovery as recommended by the manual.In addition, it is necessary to check the tightness of the pipe connection.

When the machine will be connected, and all installation recommendations are met, it is possible to shift the kitchen furniture and fix the device lockable cabinets and countertops.