Canopy over the balcony - create a comfortable area

Visor - purpose and function

If the visor is missing, then on to the balcony, and all that is on it, and fall rainfall make this a less functional.Many turn it into a mini-greenhouse, while the canopy is a very important part.It covers the flowers away from direct sunlight, as it protects the window unit.Great if the plastic, then nothing will happen to him.But if it is wood, then the canopy is a must.

For this device, you can use different roofing materials.The main thing is that they are durable and moisture resistant.So, you can take the profile sheet, slate or ondulin.These materials are strong enough and can withstand winter a layer of snow or icicles.Really do canopy and polycarbonate plastic or slate, but it will then be short-lived.

Choosing material for the visor

Profiled is bent galvanized sheet.It can also be colored with a polymeric coating.This material has its own advantages:

• resistance to corrosion;
• not subjected to mechanical stress;
• resistance to atmospheric agents;
• has a large range of colors;
• quick installation;
• lightweight.

Slate - asbestos cement corrugated sheets of gray.But color can be changed with the help of water-dispersion paints.It has the following characteristics:

• high frost resistance;
• strength, can withstand heavy loads;
• waterproof;
• low thermal conductivity;
• resistance to the damaging effects;
• long service life;
• fire safety.

Ondulin is the so-called modern evroshifer.In fact, it bitumen corrugated sheets.Onduline has several standard colors.It differs from the previous materials the following properties:

• durable;
• does not contain asbestos, which is harmful to health;
• resistance to different climatic conditions, from sun up to the frost;
• biological resistance to bacteria, microorganisms and mildew;
• low water absorption;
• little weight.

How do canopy over the balcony - an action plan

Installation visor on the balcony requires preparatory work and the relevant tools.This will require drawing equipment, material for the canopy and frame, screws, sealants, drill, welder.The surface on which the work will be carried out, should be smooth and clean.On the day of mounting the weather should be dry, then between the coating material and the surface will not be wet.Then you can start to work.

The first thing to do is determine the type of visor.If a single balcony, it is better to close it from all sides.Once selected the type of visor, make measurements.

to the balcony was completely protected, shelter should be wider than 30-40 cm. It is important that the measurements were taken accurately.This will eliminate the risk of damage to the material.

Then we suggest you make a drawing, in which we will see how to make a visor.Of course, you can do without it, but then you have to be very careful.Then proceed directly to the manufacture of the canopy and frame.

welded frame is mounted to the wall, is secured so that there are no gaps.Treat seam sealant.If it was decided to do a closed canopy on all sides, then sheathed first sidewall, and the joints are sealed.

above stack selected roofing sheets and fastened with screws.To carry out regular repairs visor balconies, all seams should be properly sealed.Then it does not leak, and a balcony will be qualitatively and permanently protected.Canopy turn balcony in a quiet and cozy place for rest and relaxation.