Glazing of balconies with their hands or how to make a balcony useful location ?

What does the cold glazing?

reasons that make make the protection of a balcony or loggia can be set.Depending on the purpose for which it is planned to use this area, and can be carried out various ways of performing.So, if you plan to store on the balcony to dry clothes or things, you can use a cold glass balconies.

This method has been used for many years, since Soviet times.It used it in cases where the loggia or a balcony is not planned to operate as a full warm room.During summer, it can be organized, such as the workplace.In winter time the temperature there is significantly below room temperature, though seldom falls below zero.In this regard, there may be stored vegetables.Use this method for a wooden frame or aluminum profile with a single glass.The windows are made with rotary or swing-out mechanism.

The most popular option is considered to be a wooden frame with a single glass, and rotary valves.This is due to the fact that this equipment is the cheapest and environmentally friendly.However, the wooden frames require regular care and color and they are prone to decay and destruction.But if the wood handle properly, then these problems for a long time you will not encounter.

Note: aluminum so there is no need to handle carefully, but he is very weak conserves heat.

Other ways

glazing Another popular way - a panoramic glass balcony.This method involves construction installation from the ceiling to the floor without the use of frames.Performs work in different ways, but the most popular is considered frameless glazing.It uses special glass 6-8 mm thick.Accidentally hit it almost impossible to break.In the cold season, thanks to these glasses the room gets extra heat from the sun, but the housing can heat up strongly in the summer.Avoid this very easy: just install the blinds.

Another equally popular way - sliding balcony glazing.Use this system for small terrace area when turning the valves opening difficult.Implement it, you can use the panoramic glazing and aluminum.The system works on the roller mechanism, pushes the shutter does not occupy space at the same time.Having decided to implement such a system, you need to consult a specialist, because they do not always have such an opportunity.

Tip: use the sliding system is not practical in our climate, because in the cold roller mechanism freezes.

Glazing balconies with their hands - the order of execution

Now consider for example how to make glazed windows and balconies made of aluminum profile.The design of the glazing consists of various elements, which are assembled on site.Before starting the installation, you must clear the parapet and an upper balcony slab from the skin, and other elements.Next:

• design installed on the parapet and fixed mounting hinges and screws to the plate;
• Under mounting tabs is put visor made of steel with a protective coating;
• visor attached with screws to the plate;
• By marking made low tide, which is mounted on the outside of the structure;

Important!All joints and drainage should be treated visor protective and decorative layer.Installation joints are filled with foam.

• Mounted hollow glazing sash mounted glazing beads (clamps that provide the density of glass fit the window frame).

This aluminum frame assembly is complete.