Build Daily

Accomplishment

August 12, 2017 18:07

Garden path - both practical and elegant suburban area decorate their own hands ?

click fraud protection

list of necessary materials and tools for creating tracks wood

wooden walkway in the garden - this is an unusual element in the garden.For its placement, you can use different types of wood.It all depends on whether there is already cut down a tree or dry, preparing to chop down.An excellent material considered massive branches, logs, boards.

To create a track need wooden penechki

Materials needed:

  • Bars tree stumps of different breeds;
  • electric saw for cutting wood;
  • Clay;
  • Hank polyethylene material;
  • Brush painting;
  • Capacity (preferably metal);
  • Cement;
  • Sand;
  • Linseed oil as a base for paint.

All tools must be carefully chosen so as not to miss a single moment in the arrangement of the garden path .

Entrance processes, or how to prepare the ground for tracks

Getting laying tracks, it is necessary to fulfill a list of preparatory actions:

  1. Choose material - wooden penechki rings.Knowing their diameter, it is necessary to determine the amount.tree cutting should produce a chainsaw, it makes cuts quickly and leaves no surface roughness.Penechki thickness should correspond to five centimeters.The smaller size makes the track brittle and unusable.

    Thickness of wooden rings must comply with the measurement of 5 cm

  2. Fill a metal pot with varnish.Heat it in the fire.
  3. Brush apply varnish on the cut ring of the tree.
  4. Dry material.

process of creating tracks with his own hands: photo

It should adhere to a specific sequence of actions:

  1. necessary in advance to pick up the tree and determine the diameter of a circle.When installing it is important to observe some penechki hill above the ground (it will melt water does not collect on the track).

    Stump must have some elevation above the ground

  2. It should prepare the ground under the track.It is necessary to shovel remove the top layer of the earth.This will create a good basis for a wooden material.
  3. Put tape on the bottom of the earth deepen lay film.You can use the clay.This is done in order to avoid excessive humidity.
  4. Sprinkle sand or clay film.
  5. Start stacking wood.Placing the ring is as close as possible to each other.Gaps between the material to fill with cement mortar.

    Slots can be filled with stones and

  6. After drying track to pour water.

Note: The length, width of the track can be selected individually.you can build and plant borders along the edges of ornamental plants, if desired.

Ready path of wooden stumps

instagram viewer