Paving the paths between the beds , beds and buildings

Do we need paths between the beds?

Classic garden - it dozens of beds, neat rows stretching for many meters, and to move in this space, it is necessary to put your feet in the narrow aisle.Now imagine that you started watering.Where the water run?It is there, where presumably you have to wade a step-by-step along the landings.And will either have to put up with dirty feet, or come up with a more viable option, for example, the paths between the beds.

easiest to throw bricks at a distance from each other step, but the solution it?Therefore, we take the board, connect them end to end butt bars, nailing the last on the lower side.Same nailing bars at regular intervals, and below them - square wide board trimming can be the same as those from which collect the entire structure.Now, even if we put the resulting "causeway" in the muddy soil, it does not fail at your weight.

If aisles are wide enough, it is better to collect a lattice of slats, stacked on nakolochennyh equally spaced cross bars.Between the supporting crossbeams nailed another rail diagonally to the whole structure Saves the geometry.Convenient

such decks so that they can be placed anywhere, and no longer needed to clean .However, tracks in the yard and in the garden can not be the same that apply between the beds, do not always look in the garden or around the house.

tracks in the yard - how to make them comfortable and fit into the landscape

Lattice bridges across the yard can not be put as the form and will not be presentable, and planned in such a way to track the movement will be very shaky.The path around the house and around the site should be different from the paths in the garden, if the last fit and the rough boards, for the monastery need something prettier.For example, to go it is not necessary to lay concrete walkways in the garden, surrounded by lush greenery.You can do bulk materials, such as coarse sand.

Well, if you do not want all the time, coming home, neaten soles and clean the hall from the individual grains of sand, using sawdust.Pour them into a thick layer of specially prepared shallow trench is soft, comfortable and most importantly for fatigue-foot finish.For the same purpose is permissible to use and bark fibers which often lie on the thick carpet cuttings.Well, more durable option, although less natural - expanded clay.

Of course, all of these bulk materials are just not recommended to lay on the ground, the base is first necessary to prepare.The soil is taken out to a depth of a shovel blade, align the bottom of the ditch, fall asleep halfway with gravel or fine gravel, then ramming and even then rolling in the sawdust, bark or expanded clay.A good option would be for lawns and paths, with borders of rabatok.To plant a lawn, you can use the roll option.

tracks near the house must be well thought

most seriously should be taken to the paths surrounding the house, leading to the gate with a wicket, that is, to move to the area.It is logical that if you have a car, the bulk surface is not the right choice.But the lawn is still permissible to use, however, the pre-ground you need to put a special lawn grille that protects the plant and will be a reliable support for the wheels of the car.Such arrays can be either concrete or plastic.

The classic version - asphalt, but it needs to be able to style, the technology is complex and the slightest flaws can lead to cracking of the coating.If it is short about the main thing, the essence is.First, excavate all the same depth shovels, then poured a substrate of sand and gravel, and fill almost the entire trench.This is followed by careful tamping.Then pour the heated asphalt, layer should be no thinner than 5 centimeters , then compacted manually vibratory rollers or use a vibratory tamping machine.

It is important to remember that for laying asphalt canvas soil must be carefully aligned, and the coating itself is desirable to make curved from the middle to the edges, so that the water dripping from the hearse.

for car cover is, of course, ideal, but it looks pretty boring.Better come up with something of their own, original, especially for the pedestrian part of the site, for example, luminous coating.However, do not get carried away.For example, if the garden is better to make the path winding, which is good for walking, the tracks near the house is more appropriate to make the straight, to walk faster, where you need to.The same goes for the way to the gate, do not do it on the beds, which now and then will have to do, then they will just irritate you.