Self-adhesive wallpapers in modern finishing coatings

Self-adhesive wallpapers: properties

Photo Wall Murals adhesive on the wall are made on the basis of vinyl with a matte or glossy PVC coating.They are used for labels on the following grounds: MDF, glass, plastic, metal, mirror, smooth furniture and door panels.As with any coating has its own characteristics.

• not fade and do not fade with time.
• ability to form a dense coating which lasts a long time.
• are moisture resistant and perfectly cleaned.
• Suitable for both home and office decoration.
• not afraid of changes in temperature and withstand even 80 ° C.

Self-adhesive wallpapers: surface preparation and tools

Are put data on the wallpaper perfectly smooth and flat base, which must be free of cracks, potholes and defects.If the surface is loose and porous, it is better not to carry out pasting.It is also important to see to it that it was not based on fat.Clean stains, you can use tools for cleaning or in extreme cases, a caustic solution.

If the base does have some irregularities, then carried her plaster and polishing.Then smooth out the surface and cause the acrylic primer.This is necessary in order to provide greater strength of the coating.When gluing on a wooden panel, cork, ceramic (for example, when making wallpaper for the bathroom), it is important to ensure that, on the basis there was no water droplets.

It must be completely dry and primed plus.Those boards which do not have lacquer coating, primed with a special varnish, and in some cases using methyl wallpaper paste.When applying the wallpaper on glass, metal or plastic (synthetic materials) must be pre-wet the surface with water and detergent.

is also important to prepare all the related tools that can be useful in the process.These are: a pen or pencil, scissors, a meter or range, rag, disc blade, doctor blade, glue for wallpaper (for use on round surfaces), hair dryer and for glass "Mr. Muscle."

Self-adhesive wallpapers: sticky

the back of the wallpaper paper separated by about 5 centimeters and apply the material to the surface.First, stick the edge.Then evenly pulled the rest of the paper and gradually continue to apply wallpaper.Meanwhile the other hand smoothes glued cover with a towel.Thus, air bubbles are removed and folds.If bubbles still remained, they must be carefully pierced with a needle.

Cover corners and edges of the material is carried out by receiving uncomplicated.Wallpapers are first heated typical hair dryer, and then bent at the edges.For smooth corners and edges, incised Mural at a 45º angle and glued.To the edge were the most "clean" and it is important to smooth them with your thumb, zaglazhivaya all irregularities.

care for coating when cleaned wallpapers to the apartment or office, then this is only water and detergent is needed.In the case when the dirt is not washed ethyl alcohol used.In no event it is impossible to use any means that contain acetone, Universal Nitro Thinner, abrasive substances, cleaning petrol.When projecting from under the edges of the adhesive, carefully rub clean with alcohol.