How to apply the primer - machinery and work tools

How to apply primer - first, make a choice

not only the reliability of the clutch differs primed wall primer application is also great saves from mold, mildew and rust.Good results are achieved by using a special chemical composition of the mixture.Substances included in it significantly reduces porosity and increases the basis level of adhesion of subsequent materials applied to the base surface.Some expensive primers also have leveling properties.

When selecting primer volume refer to the fact that when a mixture of cheap and not very high quality, you may have to apply it several times.

There are two types of primer mixture. Firming applied to the plastered surface before painting or pasting.Deep- - more expensive option, which is used at a low porosity and high friability of base absorption, as well as the facade works with excessive demands.

application of a primer depends on its type - we understand

All primers are divided into several types:

1. Acrylic - is most preferred for self, home use.Easy to use, easily dilutable with water and is applicable for all surfaces, except for ferrous metals.
2. Alkyd - made on the basis of alkyd resins and used primarily with wood products.Ideal as a base layer for painting wooden surfaces.But it can also be used for coupling with fiberglass, PVC, tiles and other materials.
3. primer metal - is used for surface protection against corrosion.For each type of metal used its primer.
4. primer for concrete - is used as a fastening surface for subsequent coating enamelling.

How to apply primer - Getting down to business

At the surface preparation for future work deep knowledge of how to work with the primer, can provide a significant, lasting and stable effect.First, prepare the base for applying the primer mixture.

Using coarse sandpaper and remove the hard spatula old paint, remove small errors, pellets, clean the surface from possible rust, grease and dirt, align significant differences.If necessary, for large bumps, use plaster.

to the main question - how to apply the primer - come from all over thoroughness.Be prepared to provide the necessary tools.You will definitely need:

1. Roller primer, it is more convenient to use two rollers: on a short handle and a long stick.
2. broad brush for hard to reach places and corners.
3. tank primer.
4. Large spatula.

The selected container, pour the required amount of primer.If using the concentrate, then dilute it, strictly observing the instructions requirements.

Now, dipping roller with a long handle in the prepared mixture, spread evenly over the entire surface primer.Instead of a roller, you can use a wide spatula.Make sure that all parts have been carefully dyed.Rough brush treat all angles, space for battery, wall joints.

If necessary, repeat the procedure once again and wait for the complete drying of the surface.Now you're ready for the next repair works.