Build Daily

Building Materials

August 12, 2017 18:08

What if creaks laminate : actionable advice to fix the problem

click fraud protection

creaks laminate - for causes

Before eliminate squeaking laminate, you must find out the cause of this unpleasant sound.Total per se, as a rule, can be three:

  • sand or debris under the flooring.This is the most common reason for this type of coverage.Thus, while moving from room to room occupant hears very distinctive sound, which is called the creaking of the laminate.Means the appearance of such a defect can only be one thing: during the laying surface forgot to vacuum or in general it is not removed.If you use high-quality laminate flooring, it makes sense to have a little patience until the grains of sand squeaks razotrutsya and stop.

Attention!If used for laying low quality laminate, the sand, hitting the castles, within a year or less completely damaging them, which leads to failure of the flooring!And this, in turn, to additional financial costs.

  • The second reason why the laminate crunches, it is no gap between the floor surface and the skirting .According to the rules of installation, trims must be suspended above the surface of the laminate, which will give him a place to turn.If such is not the same, then the two friction elements and create unpleasant noises during movement.

Tip!To once again be safe from scratches appearances, it is necessary between wall and laminate to leave a gap of 1 cm, but not less than that!

  • Few people know that after a full installation of flooring presented it for a while yet, so to speak, it takes the place.For this reason, and it is necessary for this location.Since the material is made of wood, it is very sensitive to temperature changes.So, if he has no place to turn, then, upёrshis the wall in certain areas cover rises.Treading on a place, you will hear the characteristic sounds.
  • third reason - it's uneven floor.This is a gross error that can be tolerated during installation.

Remember!If the floor surface has depressions or projections, they must be removed!

  • Even if you enclose several layers under the floor, they eventually wear out or or prosyadut that will lead to the appearance of scratches.

troubleshoot problems on their own

If you have a question, "creaks laminate, what to do", this chapter will help you deal with it.Immediately say, that nothing pleasant in the process of elimination of defects not.But as they say, can not be helped!Thus, we consider the main points:

the easiest task you will, if there is no gap between the skirting board and the floor covering.In this case, you need to dismantle the baseboards.Then, putting the necessary clearance to install it on the wall.

Attention!Removing the plinth, pay attention to the existing gap between the wall and laminate flooring.If such is not enough, it is cut along the board.

worst option would be that, if you notice that the floor is uneven, and why there are unpleasant sounds.In this case you will have to dismantle the entire surface, followed by its alignment with special mixtures.After that, you will need to produce a laminate installation again.

less time consuming is the process of elimination of scratches due to dust under the cover.You also have to remove the entire floor, but under it just a good tidy up.After that, make a re-laying the laminate.Also, do not forget to obmesti each tablet individually, as dust and sand, surely, have got them!

Professional Advice

of professionals share some tips that will help to quickly and accurately eliminate unpleasant sounds when walking on the laminate.So, if you have found the place in which the coating emits a distinctive sound, you need to remove the boards and put a piece of cardboard under them.This will help alleviate the fluctuation of the coating and to eliminate squeaks.

Another tip experts says that for a quality installation cover must be handled only by the masters.Some citizens, read the instructions, believe that the laying of laminate - a trifling matter.In principle, it is.But in order to avoid subsequent elimination of defects, you need to carefully prepare the surface.And many can not cope with this task!

instagram viewer