Fur roller or facilitate the execution of painting works ?

What fur cushion?

Modern fur cushion - a fairly simple tool designed to carry out painting works.Outwardly, he is a solid rotating cylinder mounted on the handle and covered with a fur cover.Current standards require the use of a cover for the production of a natural tanned sheepskin or silk, topped with synthetic yarns.Staple the material is permitted only with cotton thread of a certain thickness.

To produce a tool with a fur cover is used only uniform material with the same length of lint!

Worth on such an instrument deserves special attention.Today, in the construction market, you can find a huge number of different roller pile length on the cover varies from 6 to 25 mm.No less important are its parameters such as diameter and length.

Typically, the diameter of the product is in the range of 4-7 cm, and length -. In the range of 10-25 cm Experts recommend carefully approach the selection of a tool for those who have never worked with him.The best option would be a roller paint fur, having an average size and not too long nap.

When the paint roller is used fur?

When repairing a mohair roller is suitable for application to various surfaces of oil paints, lacquer and enamel compositions.Furthermore, it can be used when working with an alkyd primer.Why roll with a fur cover is widely used especially for these types of jobs?

answer is quite simple.Due to the long pile, a cushion to absorb a fairly large amount of paint or glue.This allows quickly applied to the surface of a dense and uniform composition layer.

length of pile and its quality determine the existence of the pattern and texture of the finished surface.

However, this type of tool for house painting professionals and manufacturers have warned that lime formulations easily destroy the fur and significantly shorten the life of the product.That is why working with them is recommended to use other types of rollers.Adhesives and various paints, on the contrary, do not have such a negative impact.

If you purchase a roller with a long nap than once, you should pre-acquainted with the rules of care.This will save you from unwanted financial cost and will allow to always have on hand a ready-to-use tool.

roller with a long nap - especially exploitation

In order to obtain a uniformly colored surface, you must include the long dip the roller into the paint, and then a little to ride it on a special sheet or a paint bath.As a result of this simple action with roller removes excess staff, which will save you from splashing during operation.

Do not use the same cushion with a fur cover for paints of various types, even if it has been properly treated with solvent. Before starting work, be sure to soak the new roller in the water for about 5-6 hours.This measure will make the pile is uniformly hard, which will improve the quality of the treated surface.

If you want to use is already in use by the former roller, first rinse it thoroughly in a solvent and then with soapy water.Kerosene is ideal for washing tool in the process, if you use oil coloring compositions.

When working with water-based paints have enough on hand container with clean water.Keep a cushion is recommended in dry form, however, it is possible to load the tool into the paint and tightly close it if your plans include its operation in the next day.

Thus, it is only necessary to pay enough attention to the choice of paint roller and explore the features of its operation to certain finishing and repair work did not begin to have a nightmare and turned into a pleasant pastime.