Wonder shovel or garden cultivator ?

What miracle shovel so good?

Excitement around the new instrument has risen serious.It would seem, why reinvent the wheel?However, extraordinary shovel as much different than we are used to bayonet like a rake of the forks - purpose tools in one, but it is achieved in different ways.

If you need to carefully loosen the soil, does not necessarily turn its layers, small enough to slightly raise its bed flowing between clumps of submerged land in teeth.This is how wonderful a shovel.

Most of this unusual shovel like a kopalnye forks used for particulate soils, only those moving in the soil with the help of the stop.True, there is one feature - you can work only in the wet soil, it is best in early spring, when the snow has melted, but the moisture has evaporated completely from the topsoil.

in solid, baked in the hot sun, cracked earth such a shovel virtually useless, should be good irrigation.After watering, when the soil becomes soft (but not too wet), vilopodobnoy shovel, which many have called miraculous, work easily and with pleasure.

How to use garden ripper?

Modifications new tool, there are several, and one of them is particularly interesting - in a frame combined with a rake garden forks, rear fence there, and two long handles allow you to work, hardly bending.Feedback from those who have already managed to try a miracle tool in action, this option allows you to loosen even sod soils, the only condition - it is necessary to stick to the teeth of the fertile layer is not the entire length, but only half.

The principle of operation is as follows ripper - rake lift the turf and long teeth to penetrate the soil deep grooves without turning clods .Some are advised to remove the usual turf spade, and only then proceed to the cultivation of the land, biting into it for all of 30 centimeters teeth.But such an approach would mean double the work and that know-how is absolutely useless.

How to make a miracle with his own shovel?

Having the drawing or photo of the new tool, you can order it familiar welders, while shovel to make a miracle with his hands - the best way to save money and grow up to the master-at-all-hands.If the country you made of PVC water pipe, and welding machine for plastic pipes to pay have not yet, or know where to get it - it is only for the materials.

will take you to 4 meters of PVC pipe with a diameter of 20 mm, 6 or 7 tees (depending on whether you want to receive the tool 60 or 70 centimeters wide) and 2 crosses and 2 brackets.

When welding PVC beware, plastic cools rather slowly, and short parts are forced to take on the heated areas, use for work gloves.

working part consists of a series of tees, interconnected short lengths of pipe.Along the edges of welded cross, followed by further angles, rotated by 90 degrees with respect to the free offshoots tees.The teeth are made of 30-inch pipe sections, cut from the middle of the tooth, and soldered to the tees and crosses the lower branch, cut forward.

welded to the corners bent by the letter C (or P, how you look) pipe, a short part of it should be 25 centimeters.In general, to get a successful miracle shovel their own hands, video, drawing and other materials can be found in the Global Network.

can replace the teeth of PVC metal, sheet steel, thickness 5 mm, the welded metal rods into pieces with a diameter of 13 millimeters, which in turn fused into tees and crosses.This design is entirely made of metal is more reliable, as the basis for the welding of the teeth and the abutment area is taken 35x35 millimeters.

Cuttings should be wood, nest for them should be performed both in the plastic and the metal are long enough and gradually expanding (when working with PVC is better to use an adapter for the larger diameter pipe and make nests under the shanks of its segments).