Chisel tricone - whether so it is necessary in an economy ?

chisel hammer in tricone not put!

If you decide to start your own business, and the main direction of selected drilling, for example, for the arrangement of boreholes, the ammunition you must be present and diamond bit tricone.What, in fact, it represents?In fact, this is a drill, a chisel called more by inertia, because before all drilling is carried out by the shock.

As a result, today a massive drill bit with one or more cones conical (cylindrical or spherical) shape, which is attached to the motion of rotation through a bearing, has the same name as the well-known carpenter's tool. Among other things, works for well used chisel blade, relevant only for the passage of soft, loose rocks by cutting.This type of equipment is also called auger bit.

Choosing a chisel to punch

To make a hole in the concrete, the usual drill is not enough, even with pobeditovye soldering.Of course, a drill with a diamond-coated perform such a task, but if high-grade concrete, then it becomes blunt.Therefore, work better shock method, and for this we need a good make chisel to punch.In this case, you do not even need a drilling mode, the hole quickly formed and under continuous pecking blows.

Hammer was not always building tool, the name came from an ordinary jackhammer, used by miners for punching pits in the rock.

Note, however, that the bit diameters are different, and not all hammers can cope with extremely large attachments.Since power tools are divided into three classes on the powers of the power, but the heavy hammers weighing about 8 kilograms can provide the deepest hole diameters up to 50 millimeters.Classification of bits is also important, for example, if the nozzle SDS-Max are designed for above diameter, the SDS-Plus drills for small and medium sized holes are drilled up to 20-30 mm in diameter.

Can be used as a chisel, chisel?

As a separate tool bit is used only in the carpentry craft, and repeatedly laymen confuse it with a chisel, trying to use the latest in a similar way, namely by applying hammer blows on it. This is a gross error, since if the instrument is equipped with a handle, adapted only under the palm, and then covered with plastic or rubber, even small impacts the handle can quickly lead to disrepair.In other words, as the chisel bit in any case can not be used, even if it and strikes, the sheer force of the swing arm.

The rest of the instruments are really similar.Note, however, that the strength of chipping with a hammer disproportionately higher than if you run only muscle strength.Therefore, the tool adapted for application on it attacks, usually done particularly powerful.Is no exception bit flat.This metal bar of rectangular cross section when properly performed at the end of the sharpening able cut the nail without any damage to the blade.