Sewage pipe

Possible materials manufacture of sewer pipe products

term "sewer" has some specific features that should be considered when installing the sewer communications.These features form the basis of the conditions in which is mounted drainage, the technical characteristics of the building, as well as financial possibilities of the owner.All these aspects directly affect the choice of the type of pipe fittings for sewerage.This type

materials drainage system for mounting can be made of different materials.These materials may be:

• Metal.
• Pottery.
• Concrete.
• Polymers.

Each of these materials has its own specific performance and installation features.Next article will be described and characterized each type of pipe for installation of sewer systems.

Pipe Fittings Sewer from

metal pipes for drainage of this type are the most common use for large-scale drainage systems.This pipe fittings can be of two types: stainless steel and cast iron.

Metal pipes of steel have the following characteristics:

• relatively low cost products.
• High strength.
• resistance to mechanical stress.
• ability to withstand high loads.
• high coefficient of thermal stability.

Cons use of steel pipe products for sewage:

• high specific weight of the product, which significantly complicates the transportation and installation.
• Low resistance to corrosive processes.That significantly reduces the service life and increases the risk of damage to the sewer line.

Sewer pipe made of cast iron has the following characteristics compared with steel pipe products:

• greater strength.
• High resistance to mechanical stress.
• Longer service life.

cons of using this type of pipe materials are:

• greater than that of steel pipes awkwardness and specific gravity, which greatly complicates the process of transportation and installation.
• Much of the surface roughness, which contributes to the emergence of different kinds of blockages.
• high complexity joining parts of pipe fittings to each other during installation.

Thus, the pipe for drainage made of metal have a large number of distinctive features.The main advantage of this type of pipe products is the high safety factor and long lifespan.

sewer fittings ceramic

This type of water supply system elements used in the exterior sewers, passing the liquid which are not head and move within communications gravity.

Pipes of this type are domestic, industrial and rain.The main advantage of this type of pipe fittings is their cheapness.But the low price this figure hides a small strength, so this type of pipes can not be used with high intensity of drainage drainage materials systems.

This type of tubular products must have a certain number of specific features:

• on products should always be several grooves: at the end of the pipe from the outside and inside - at the mouth.
• Pipe fittings made of ceramic to withstand the pressure of 0.2 MPa.
• inside and outside the pipe must have a layer of ceramic glaze, which resists chemical elements.
• In the production of this type of tubular products, they should be burnt at a temperature of not less than 1300 degrees inside and outside.

big plus pipeline of ceramics is the fact that after their injury or decommissioning of parts of the product can be used on the farm.Since the shredded material is suitable as a tamping layer foundation of ceramic parts can be mounted various tides for various buildings.

Piping products for reinforced concrete sewer

This type of drainage valves used in various types of construction in the part of non-pressure sewer systems.The material from which made concrete sewer pipe should be marked on the water permeability.Markings may be as follows: M350, F200, W6, B25.

main characteristics that distinguish pipe made of reinforced concrete are:

• Compressive strength.
• tensile strength.
• coefficient of resistance to low temperatures.
• level of water resistance.

In terms of technical characteristics of this type of pipe is divided into several types, which depend on the possible depth of laying the drainage system:

• 2 meters.
• 4 meters.
• on 6 meters.

main distinctive performance of this type of sewer fittings are their low price and chemical resistance.

pipe products for drainage of polymers

At this stage of construction technology, this type of drainage valves is most common because of the large number of characteristics that have sewer pipe from a variety of plastics.Among this type of tubulars can be distinguished pipe fittings from PVC and polypropylene.This type of pipe fittings is easy to install and transport.Most suitable for domestic sewage.The downside is the low resistance to very low and very high temperatures.

Thus, in the article have been described and characterized by all kinds of drainage fittings, which can be used in the installation of modern sewage systems.