Connecting the chandelier to the double switch and its circuit when connected together with a fan

connection to the double switch chandelier

After purchasing the goods necessary to install and connect.If it is a normal connection, then everything is easy.In some cases, the connection lamp - a science in which we try to explain the order.

switches can be:

• -button;
• Dvuhklavishnymi;
• three-key;
• Chetyrehklavishnymi.

consider to start connecting with dvuhklavishnym lamp switch.Such a switch provides switching of light in two different locations.Joining the wiring from the cartridges in such a system must be in parallel, regardless of their number.If you wish to connect to the switch dvuhklavishnogo chandelier can be installed jumper between occasions.Wiring diagrams and the option of a conventional chandelier with a fan are provided below.

Connecting trehrozhkovoy chandelier with 4 lamps or pyatirozhkovoy occurs on the same principle: you should define a common wire coming out of the ceiling with the help of the phase indicator, connected to it by a single wire pair from the cartridge.The two wires from the ceiling connected to the remaining wire of the pair.Connecting the LED lamp comes on the same principle, the process is different only in the number of wires, connect the video can be viewed here.

Video: how to connect to the chandelier-button switch

In fact, in order to properly set the home lighting fixture, no need to call an electrician or go to a neighbor for help.Enough to see the detailed video with steps and everything will fall into place.However, if you have a question about how to connect halogen chandelier, check out the main rules concerning the installation of lighting with LEDs.

Connect chandelier with one-button switch is quite simple, you just connect two wires in pairs - zero to zero, phase to phase.There should not be problems because the electrical wiring diagram in this case is simple.

Connecting the chandeliers in the two switches.How to connect two lamps?

Installation of LED lights to the single switch all connections must be carried out in parallel.In addition, the zero wire must be connected to a common zero ceiling conductor.Connecting the chandeliers in the double switch is the same principle, it is possible to study in detail the special circuitry.The process itself is quite comfortable and does not require any additional knowledge, but always remember about their safety.

In order to get acquainted in detail with how to connect to a lamp dimmer, pyatirozhkovuyu, trehrozhkovuyu 5 or carob chandelier on two switches, we recommend to view a special video, where, in practice, contain all, of interest to you information.

Do not forget that at any connection, be it halogen chandelier, 2 switch, with 6 lights or on a field, you must always remember safety.It is mandatory to temporarily stop the flow of current in an apartment and work in rubber gloves.

To connect the lamp to switch dvuhklavishnomu need to use separate boxes, no matter whether it is a connection trehrozhkovoy, LED or pyatirozhkovoy chandeliers.

Installation lamp with 5 lights going on parallel connection of wires of each horn.If you have purchased Chinese chandelier, the standards of its installation may be different as well as the quality of the product itself.After reviewing video tutorial, you will learn to how to connect the Chinese, halogen chandelier, and a diode.In addition, you will tell in detail how to properly connect and hang up.

Follow all the instructions and rules, the connection will take place quickly and without any problems.But, if you're not confident in their abilities, seek professional help because of this may depend on your life.