Press pipes Rehau : the benefits and basics of installation

little brand

company Rehau has long been engaged in production of high-quality products, which is multifunctional for use.This brand is characterized by high accuracy and ease of installation.Among the users of the trademark is popular also for the reason that is easy to use even a professional.Brand positioning - with Rehau any problems are not afraid!

Secrets of pipes and fittings

Rehau provides a wide range of pipes and fittings, which are used for water and gas supply pipes.It is noteworthy that the company has become more famous for its pipes for life, rather than for industry.

The secret of the company - it is kind of the polymer, which is produced at high pressure when the polymer chains sewn peroksidami.Eto quality helps to restore shape after a hard workout.But with minimal and medium loads polyethylene copes seamlessly.

Rehau used for cold water pipes and roads with hot liquids.Crosslinked polyethylene these pipes makes it possible to very quickly add a system, as a constructor, use the press sleeve.

What advantages has vested pipe Rehau?

1. have a greater degree of resistance to corrosion and chemicals.It provides them with an increased service life in hard mode - up to 30 years on average - up to 50 years.
2. the inside has a smooth surface that makes it easier to skip the content and does not accumulate mud and other deposits on the walls.This fact allows you to easily apply them to the sewer environment.
3. Polyethylene pipes have mechanical resistance and impact resistance.Therefore, for pumping gas, liquid with a pressure element 10 Bar.Incidentally, not less strength and withstand Rehau fittings that allows to generalize for all piping systems - they can withstand a pressure of about 10 atmospheres.
4. zvukoizoliruemye They do, and it is said to silent water, gas, etc.
5. resistant to different temperatures, from -10 to 200 ° C.It is also able to function at boiling water 100 ° C indefinitely.This fact prosekli wizard to install heating systems, so often Rehau pipes can be found in new homes.

Yet, in addition to all these advantages, forgot to mention the most important thing is the absolute inertia, which allows the use of tubes and pipes Rehau press hydraulic line for drinking water.As well as the absence of a threat to the environment and the threat to human life.

Installing pipes and press for pipes Rehau using plastic fittings

Many plumbers are convinced that installing pipes Rehau in addition to being simple, fast, and even eco-friendly (apparently, they rely on the harmlessnessand no toxicity) .Only should understand that simplicity and speed provided by the presence of special tools that will be able to mount slip-on fittings.

For installation, you must purchase such tools

1. diameter expander (expander).
2. Press clips that need to be tisnut sleeve coupling elements.
3. cutter, or a device that can do trim the ends and cut into the workpiece.

This basic kit, without which lay down the pipeline system is simply impossible.

in turn press for pipes Rehau XLPE occurs in the following sequence:

1. Use the expander so as to insert the nozzle into the tool diameter must be necessary to push the handle until it stops at a right angle.
2. From the bay obmeryaetsya segment blank is cut and its end guillotine.
3. at cut face wear sleeve and the chamfer in the direction of the future of the joint.
4. With expander expanding diameter.Carried out by placing the pipe sleeve to the desired attachment, but so that the sleeve was further away from the end and then Expander handles connections together.Due to this, its diameter is stretched.
5. diameter widened, but he soon begins to narrow, so the advanced end of the press fitting dress, or fitting for him.
6. then need to push the sleeve to the fitting and use press jaws, which were spread on the handle 180 ° with an attached middle retarding insert.A second insert is located in the working zone of the clamps and fixed clothes peg.
7. sleeve clamped smoothly and continuously with displacement along the handle press clips.The main thing is not to displace the fitting sleeve.

It is understood that the installation using the press for pipes Rehau is done only once and will not tolerate another intervention.During installation, care must be taken that there are no distortions landing sleeve and fitting, because the only way to achieve the tight connection.