How to fix pipes on their own

How to fix sewer pipe: pipe system mounting Sewer

Ustanovkatrub occurs when using special hardware (clamps), which act to protect the entire structure of the strain.

process requires such tools:

• Screed round or the letter «U».Sometimes metal and plastic;
• lock;
• fixing node (eg, screws).It has upper and nizhnyuyuchast, so the clamp for fixing is detachable and one-piece.

steel clamp fastened together with rubber, which eliminates additional vibration of the pipeline.Lock looks like a latch (polymer clamp) or bolt (steel).While in clamps letter «U» does not lock, and the tube being compressed in two girths.When etomuzel fixture will be located at the bottom of the clamp or tie.

How to fix pipes: the variety of collars

Separate these types:

1. crimp.It works on the principle of joint fixation and compression space and fittings.Provides tightness design.
2. Guide.Used for pipes, mounted on the support surfaces using the markers and fastening units.
3. reference.Speaker assistant for fastening pipes to the wall.Have vibration rubber expansion joints, protecting them also from the strain.
4. safety.It is used when a complex site requires serious support in the form of fastening.

to each specified type of discount schemes and method of attachment.Driving attachment to the bearing surface is divided into two options:

Floating - is due to guiding and supporting clamps, which fix the diameter of the screed.

Hard - carried out by crimping and the support clamp, which is put on the fitting and the pipe socket.Their function - the union of pipes and fittings.

How to fix pipes: manual

Recommendations for installation of sewer equipment:

1. household paved highway to the heated zone with the help of fasteners fittings and joints.In this connection there are no linear deformation and the system still locked.
2. Krepjat floating support with compensators linear extensions to plums for hot water.Floating scheme fixes the pipe vibration and motion, even though the linear expansion still present.
3. After marking the laying of the pipeline axis line that chertyatpoverhnosti support.Also, determine the slope of the pipe and the number of fittings for sewer system.According to the label put the guide straps and put them in a pipe.Install fittings supporting and locking band, in order to avoid vibrations and deformations.
4. When the installation is the first time, the tube is inserted into the clamp form «U» and applied in a collapsible screed.This is the final moment of ties, which involves tightening the bolt lock.Important!Do not pull too hard collapsible collars before kanalizatsionnayasistema not fully established.
5. support elements are set according to the number of joints and fittings.Blank section pipes without sockets and clamps fitingovkrepyat guide and protect type.

Important!The most reliable locking of the pipeline is Stroebe, which acts as a channel, which lay the pipe.In this apparatus, yokes - only similarity reliability and strength of the pipeline.From this perspective, the most successful will be the installation of highway in a special channel in the wall.This option will allow to preserve better than any pipe clamp and highlight the amazing interior.