Replace the old plumbing in the apartment.Why paint for water pipes ?

replace old plumbing in

apartment For starters, let's talk about the old steel pipeline replaced by its modern counterpart.If a dozen layers of paint can not hide the rusty streaks, and a plurality of clamps and joints of repair welding prevent eye immediately replace this water.It not only spoils the appearance of the room, but did not meet the technical conditions of operation.This pipe is at any moment can burst and damage that you apply yourself and the neighbors can not be compared with the costs that will go to the installation of a new water supply system.

As we have said, we will begin a brief examination of the advantages and disadvantages of replacing the pipe with a new steel counterpart.Everyone knows that steel characterized by high resistance to flow within the pipe roughness and leads to deposits on the walls.But it is possible to find an alternative.

For example, galvanized steel more resistant to corrosion, but the installation of galvanized pipes rather complicated.It is necessary to use special types of welding or a threaded connection.At the same time, significantly worsens the quality of the protective coating on the joints.

The second alternative would be replacing the copper pipes.Immediately it should say about their shortcomings - they are expensive.However, despite this, they are beautiful and practical.To install the capillary soldering is used.Copper tubing is used in heating systems, and for laying the lines with hot and cold water.

And of course, they do not talk about metal-plastic and polypropylene pipes.The first is used for a long time.The inner layer of polyethylene hardly undergo any deposits.Installation is carried out by means of fittings and does not need to be a mechanic to perform his own.A diverse selection of data sizes of pipes, allows you to do as a normal distribution inside and installation of risers.

Polypropylene pipes are used most often.Their connection is a diffusion welding method.As a result, a permanent connection is obtained, which is characterized by its high reliability.For communication with a high operating pressure and hot water systems are used reinforced pipes.

main stages of the replacement of water pipes in apartment

If the tenant of a multistory home, come to the water pipe replacement more responsibly.Beforehand, purchase all materials, especially consumables.When all purchases will be in the apartment, only block the water on the riser.Everything else, do not forget to warn your neighbors that you are undergoing renovations and therefore have some time there will be no water.

To perform dismantling, you'll need a regular Bulgarian.You quickly remove the old water prilazhivaya the least effort.

Before installation, be sure to test the valve on the water.Very often it is broken, so the repair starts with the replacement valve.If you are not completely confident in his skills, contact a master plumber or from the housing office (which is much better).

Do not skimp on the purchase of a new crane.You want it to have served more than one year?Plus, set special filters that will protect your health and your device from the scale, a squeak and a metal scale.If you do not have large financial, purchase at least a pre-filter.It consists of a metal mesh and so-called sump compartment.

When replacing a washer, you will encounter a threaded connection that is to be treated and sealed.Here are two examples of encapsulation.

1. To do this, you need to purchase paint and winding.Fan flax and wind it on the thread is not large bed.Cover this layer of paint and a new layer wrap.Repeat the procedure several times.
2. Get fum conventional tape or similar material to be wound on a thread, without the use of paint.

Putting polypropylene and PVC pipes

Remember that compression fittings have one unpleasant disadvantage.Ferrule fitting with the times will be reduced, under the influence of various pressures and temperatures.After a while, you have to tighten the connection key, therefore, does not brick wall deep in the pipeline.You should have easy access to the fittings at any time.For greater reliability can be installed press fittings, however, have to apply for the dismantling of the press jaws.

As you can see, there is nothing complicated about the replacement of water pipe in an apartment.Modern materials and tools will ensure long-term operation of the new pipeline.