What you need to know about the gas cylinders and gas station

What you need to know about the gas cylinders and filling

summer we spend a lot of time in country houses, work well, have a good appetite.One tormozkami can not eat, it is necessary to take care of the stove for cooking.Electrotiles not economical, is gas stoves, for which you want to buy a gas cylinder.Gas has terminated property and buying a new bottle is expensive.The most acceptable way - is to fill the household gas cylinder.No problem - you might think, and rush on gas stations, thereby making the first mistake.

grade refueling at the gas station will not give you, of course, and to fill the balloon, they find a special adapter.However, propane should be refilled in specialized areas, subject to certain rules.Before filling cylinders are weighed and are filled strictly by weight up to 100 grams.At special stations equipped with an electric dispenser, complete with push-button controls for the gas supply or emergency stop.
before filling the cylinder with fresh gas, the vessel should be exempted from the residues of propane-butane mixture and condensate.Fill the vessel should be in accordance with the passport data.According to the rules, the balloon is filled to 80% and in any case no longer without facing claims in the tanker "underfilling".The fact is that the gas mixture has two phases - liquid and gaseous.The vessel should be free space, to form when heated vapor fraction not burst out with a bang.

refueling rules of domestic gas cylinders

If you have any of the following deficiencies, in filling the balloon you will be denied:

1. presence of visible defects of the valve and the valve.
2. no residual pressure is observed in the tank.
3. When equipment failure at the station.In case of delay
4. term container examination.
5. On the surface all loose paint is visible, dents or rust.
6. marking container and its color must conform to EU standards.

If the gas is filled in excess of, the surplus is produced in a special tank to drain residues.Then carefully check the tightness of the container.It is sure to be a safety cap.An employee performing the procedure should have a certificate of completion of appropriate training.