Toilet in the country with their own hands

Toilet at their summer cottage is vital.Of course, if the cottage is used for year-round need to think about the construction of a warm bathroom inside the house to the sewer system.If you stay in the country only seasonal, quite simply and quickly build a toilet outside.And you do not even have to dig cesspool.There is a widespread construction of suburban toilets with their own hands with a barrel instead of the sump.

Installing plastic barrels

For the construction of the toilets need to purchase plastic barrel with a capacity of 200-220 liters.

Barrel-Ground to his neck in the ground.There is an option to dig into the ground capacity without the restriction, in which you can insert a second larger container, as in the photo.The outer container will be used for the formation of holes, internal - for waste collection.Around the outer container slept gravel.

next step should be the construction of the foundation.In our case, the design is attached to the barn - it's easy and does not take too much time, so there is no need for the foundation.

detail the construction process, you can see in the photo report.Area under the toilet is leveled and laid the foundation finishing material - such as paving slabs.

on the basis of the framework set.

Building toilet frame

frame will consist of the supporting pillars of the outer wall, the top and bottom piping, which can take the timber 100 to 100. For the frame rails on the adjacent wall to fit the boards hozblok section 100 50 or board section 100 by 25.

All items are processed carcass impregnated wood type Senezh.To work needed screwdriver and mounting brackets.The height of the walls of the toilet at the cottage is typically 200-220 cm

Once connected crossbeams supporting pillars need to do at the level of the sill cover future -. Sitting.

frame front wall of the toilet set in view of the door, the width of which for convenience should not be less than 70 cm.

Vertical frame should be checked at every stage of the construction of a plumb line.Roof frame is made with a slope of 12-15 degrees to the winter snow does not accumulate on the roof.

Siding

primarily mounted door and fit the roof.Then you can begin to trim the walls of suburban toilets.The walls can be clad board, OSB, plywood - any available materials.The material for the casing must either be pre-treated by impregnating wood, or take a water-resistant.Mounting the podium

Then you can start the internal work - assembling seats (podium).To frame the podium used bars left over from the installation of the main frame for sheathing - plywood or OSB.

parts fastened with screws, the top cover is hung on hinges.In contrast barrels slotted hole into which is set toilet seat with lid.

After painting a garden suite, built with his own hands, will look inside a comfortable and aesthetically pleasing.After seeing photos and video of the construction process, you will see that it is possible even for the novice webmaster.

ventilation and lighting

To improve ventilation under the roof top, you can cut a hole and insert ventreshetku.To improve the exhaust to the outside wall of the podium is possible to mount a weak supply fan that turns on at the same time with light.

At least mounted lamp with a switch.

for chemical dissolution of many waste using special reagents, in addition the cleaning odor.With the right choice of ventilation systems and chemical reagent smells in the room is completely excluded.Video

construction toilets in the country with their own hands