Fixtures for tension ceiling : a photo , type , installation

Stretch ceilings in homes increasingly installed.This is due to the fact that the web tension is really practical and attractive solution.And the interesting thing is that every year these products are becoming more beautiful and modern.On sale you can find really amazing ceilings that will turn even the most "gray" home in a cozy space.

We should not forget about some of the problems that may be encountered during the installation of suspended ceilings.In this case, it is worth noting the issue associated with the selection and subsequent installation of fixtures.Obviously, the ideal smooth surface of any of a stretch ceiling is incredibly sensitive to the changes associated with the repair work.

course, no fixtures in the apartment can not do, and the installation of light sources must be done in a short time.Obviously, the process of mounting fixtures on the basis of a stretch ceiling has a lot of subtleties, which we describe in this article.

Also in the article we will mention about the basic details related to the choice of fixtures.For sale is a lot of options for this product, so choose the most suitable option is not always easy.

main features of using lamps on the basis of suspended ceilings

First you need to keep in mind that the choice of the lamp takes place on the basis of the ceiling height information.The higher the ceiling, the greater must be the source of light.Of course, this is not the general rule, as the room can have a large scale, and then correct to install several small light sources.

The following is a list of the main types of fixtures for tension ceiling:

• spotlights;
• LED strip;
• chandeliers;
• -plate lamps.

It is said that no restrictions related to the use on the basis of a stretch ceiling fixtures there.The most important thing - is to ensure reliable fastening of the light source.

You can also combine the type of space lighting.However, it must be borne in mind that too many lights on the ceiling could negatively affect the appearance of the surface tension.It is worth remembering that created the ceiling is rather a design solution that allows to decorate the room.

Using spotlights

often based on a tension ceiling there is mounting spotlights.They have small dimensions, so in terms of design is the ideal solution.Despite this, even in a small room several spotlights required to provide normal lighting.

A few years ago, the market can be found just a couple of kinds of spotlights, is now more than a hundred.Such light sources may be round, square, oval.In addition, there are special lounges, which offer a huge range of lighting fixtures.In this case, we are able not only to select a specific model, but also to consult with experts on various issues.Consultants easy to pick up a few kinds of lighting that will be ideally combined within a particular space.

themselves spotlights can also have some clearance, but most often it makes sense to opt for a neutral option, since otherwise we get a suspended ceiling with too much emphasis.

Most often spotlights are available with the expectation that they will be used on the basis of a stretch ceiling.The thing is that some of the light sources is strongly heated tension foundation, and this can not be tolerated.In this regard, spotlights one of the best.

As for drawbacks spotlights, the owners often say too fast burnout light bulbs.To avoid such troubles, it makes sense to buy a voltage regulator.

If the room is too large, the spotlights can only be a supplement to the basic coverage.However, there may be exceptions, as all, as already mentioned, it depends on the characteristics of the room.

In addition, spotlights may have special rims.Most often, they are purely decorative function.Rims themselves may be made of the original material, these elements also have a variety of shapes and sizes.

It should also be borne in mind that these rims can create a kind of aura of light, which, in some cases, able to focus on some of the irregularities of the tension of the web.

chandeliers based on a tension ceiling and lights-plate

immediately need to start with the main advantages of a conventional chandelier set on a tension ceiling:

• An excellent source of light.In contrast to the same spot lamp, a small chandelier is able to light up a large space.
• Appearance.Running a little ahead should be noted that is not for every chandelier, but the range of these products simply enormous for stretch ceiling.And you can buy a really amazing chandelier looks to be with tensioning the canvas to create a bright and attractive space.
• Easy to install.In this matter, no big deal, as often chandeliers have standard attachment.

Despite this, in this case, there are some problem areas.It is a question that is often home owners use incandescent light bulbs, which can ruin the surface tension of the ceiling.In such cases it is necessary to do everything possible to ensure that the heat from the lights did not work on the ceiling.This can provide the optimum light sources away from the surface (about 40 cm).In addition, you can use energy saving lamps, which are strongly do not overheat.

between the chandelier and the ceiling should be a layer of air, so the ceiling light source are often sent down.

As for the lamp-plates, it is also quite common variant, which is based on a tension ceiling looks pretty good.Most often, this kind of lighting people choose in the event that the chandelier is simply not fit into the scale of the room.The matter may be too low ceilings.Lamp-plate - a miniature light source, which although does not provide such a large coverage as a complete fixture, but also good shows itself in small rooms.Here again, we must bear in mind that the lamp bulb may adversely affect the state of tension ceiling.Therefore preliminary it is necessary to conduct some tests that will allow at least a little to make sure that the safety lamp for permanent use.This lamp can not be used candle lamps, otherwise they simply will rest in a smooth canvas ceiling.

lighting for high ceilings

Many may think that for high ceilings can not choose the standard light source, however, the opposite is true.In this case, you can buy virtually any chandelier that has a sufficient length of the suspension.Thus, if between chandelier and ceiling enough distance on the web can be a state of worry.As already mentioned, this is the distance should be 40 cm.

However, you can use chandeliers and spotlights, however, most likely, they will act as a decorative ceiling element, as the state of the lighting of the room, they did influence will not.

LED Strip and stretch ceiling

In recent years, LED Strip received considerable popularity.This is due to the fact that such a fine light source located on any surfaces, even those that have a tortuosity.However, it is worth noting that such coverage is practical only for evening relaxation in front of TV or for parties.A good source of light LED strip can not be called.

However, they canceled the show itself as a decorative ceiling element.The LEDs can be arranged in such a way that they emphasized the original appearance of stretch ceiling.Most interestingly it looks in the event that the ceiling structure is created based on the drywall.Thus, LED ribbon allows you to focus on a particular sector of the surface tension.

often decorate LED strip nice stretch matte coating and gloss ceilings reflect too much light.

Installation spotlights

most often about installing fixtures should think before stretch ceiling installation.This is due to the fact that the first need to navigate to the desired location the wires and the frame correctly positioned.

Thus, for a start is carried out some preliminary steps:

• on the surface of the ceiling creates markup, based on which we will focus during the installation of light sources.At the same time you need to take care of summing up the necessary wires.They should be close to the places where they will be mounted fixtures.Next
• mounted special racks.These are the elements, which will be fixed lighting.

After this step, you can safely carry out the process of installation of stretch ceiling.It should ensure that the frame does not seem to fit the future lamp.If done correctly, then simply groped hole and carefully cut.To get started simply enough to release the wire under canvas.

• Then you can mount Thermal ring that will go right after the main body of the lamp.At this stage it is desirable to accurately cut out a circle for the future installation of the main body of the lamp.
• Thus, after being installed termokoltsa light source.This ceiling is to be tightly fit through the hole.There should be no gaps between the rings.Likewise, the installation is carried out all the fixtures.

worth noting that the performance of the lamp, as well as the supply of electricity through wires issued, you should check before stretch ceiling installation.

stretch ceiling and chandelier

establish on the basis of a stretch ceiling chandelier is somewhat more complicated than spotlights.The thing that will create a wood platform that allows to securely hold the entire structure we need for this process.

• wood board dimensions must roughly match the size of the chandelier.Also, in the middle should be a small hole through which will pass the wire and hook.
• At the beginning of the ceiling mounted hook, which can be summed up after the wire.The very wood stove is set on the basis of adjustable racks.
• distance between the main ceiling and straining cloth should be up to 50 mm.
• Then he mounted the suspended ceiling.Then you need to find a hole and cut a hole under it.We must bear in mind that here, as in the case with the installation of spotlights, you must install the sealing ring, which will be a certain limit for the hole in the ceiling.
• Well, at the end of the wires are fed, and she chandelier is hung on a hook.Naturally, you need to ensure that all settled down smoothly and safely as possible.

Particular attention here should be removed fastening wood base.This question depends on how much weight she chandelier.With some designs almost do not have any problems, but heavy metal chandelier with some shades can not only distort the ceiling, but also completely destroy it.

Luminaire-plates and LED strips

LED strips are mounted very simply.Sami light sources are set using small fasteners (screws), and the wires are hidden under the suspended ceilings.It is said that the LED light sources is not recommended to attach to the very tension ceilings, because it can cause serious damage, or simply unreliable to make installation.

If we talk about how to install light fixtures, dishes, this process is very similar to what we have with the installation of point light sources.In this case, there is also the frame assembly and further fixing to supply wires.