Build Daily

Furniture And Furnishings

August 12, 2017 18:06

Step by step assembly instructions cabinet compartment with their hands

click fraud protection

sliding wardrobe - versatile piece of furniture that allows you to organize the space and save a lot of space in the apartment.The process of assembling the cabinet compartment, rather complicated and without the knowledge of some of the design features and technological features can not do.Masters - furniture makers, have the skills to assemble cabinets coupe, and take not a small price for the work.

Content

With step by step instructions for assembling the cabinet compartment and circuit design, you can do such work independently.Preview the video on how the assembly cabinet compartment.

Site selection and metering facilities for the installation of the cabinet compartment

chertezhi_shkaf

  1. All furniture is made with perfect right angles, which is not true of the floors and walls in our apartments.So armed with a plumb line, a square, tape measure and spirit level (water level), remeasure, prospective cabinet compartment installation location and select if not perfect, at least approximate to the ideal place.
  2. Measurements apply to paper, making a small compendium of the scheme.The distance between the walls of the checks should be both at the bottom and at the top level.Visually inconspicuous building flaws, may occur during installation of the cabinet compartment and spoil all the work.

Step by step assembly instructions cabinet compartment

installation base

  1. Work on assembling cabinets coupe with their own hands, start with the base unit.Wardrobe compartment - at low adjustable legs is convenient because it perfectly horizontal ground plane can be obtained by the calibration screw knobs on the legs.
  2. Through leg design allows effortlessly adjust the bottom.The disadvantage of this bottom - a gap of about 25 mm, which can get into the trash and dust.
  3. Higher adjustable feet, are covered with a decorative panel strip.It gives a more aesthetic appearance, but its setting makes sense for a perfectly flat floor surface.

Hull features and stiffeners

dee8d44aaf86

  1. SCREW attaching the side walls, note the stiffener.It depends on them the stability of the whole structure.An important point - the back wall of experienced craftsmen builders fastened with screws, not nailed.
  2. reason swinging sliding door wardrobes, in the absence or improper installation of the stiffeners.Their role is played by cross-ties in conjunction with the rear wall of the sewn sheets of fiberboard.
  3. simultaneously installed on konfirmat vertical piers and roof of the compartment of the cabinet.
  4. The diagram shows that when assembling the cabinets coupe cross ties SCREW mounted in each section separately and at different levels.This is necessary to ensure adequate stiffness over the entire height of the enclosure.In the central part is one continuous uniting tie.

Installing shelves based on the center line of the carcass

be79sd026ffb

  1. Usually installing shelves does not cause great difficulties during the self-assembly of cabinet compartment.Often they are located in separate sections at different levels.
  2. For axial location of shelves, furniture placed corner screed.It combines a vertical intermediate wall and a horizontal shelf plane.
  3. For symmetrical fixation added angular ties on both sides of the central axis of the mounting partition.
  4. There is another method of mounting the shelves on the central pier of the cabinet compartment - "helicopter".It's not quite the standard method of fastening comprising mounting a shelf on konfirmat in the center, having turned the shelf axis by 90 °, the adjacent shelf is mounted on two SCREW.Then, the regiment returned to its original position and is amplified in upholstery tightening corners.

Assembly and installation of cabinet doors coupe

w3

  1. Installing and coupe hanging closet doors are the final and most important stage of the installation.The facade, the front portion defines the overall visual picture for the sliding door wardrobes.
  2. mirror glued on the front of the door leaf.For labels used such as "oracal" film adjacent across the plane of the mirror and if a mirror is broken, it will not allow the fragments to fly apart.
  3. Mounted horizontal profiles.In the case of tight entry profile in the groove, it is possible accurately to knock mallet.
  4. similar process is done with vertical profiles and set the handle.
  5. Next set rollers, and the whole structure is held together by protracted Furniture screw.
  6. At the top of the door using the assembly screws going horizontal and vertical door profile and roller set.
  7. lower part of the going easier.Set the roller in the groove intended for it and secured with screws.
  8. At the top of the compartment of the cabinet opening is established guide rail.Mounted on it is strictly flush with bulkheads.
  9. bottom rail a few drowned in the depth of the cabinet.Check the correct installation of the control measurements of the vertical and horizontal using a spirit level.
  10. final touch, will stop the installation and fix the cabinet to the walls of the compartment.In the upper part of the cabinet compartment screws fasten metal fittings and fixed to the wall structure.

s6300152

sliding door wardrobes of assembly is approximately the same for all types of this kind of furniture.Assembling the corner cabinet compartment does not differ from the assembly closet compartment.Such cases are more stable due to the base structure and additional support on the wall.Instructions for their assembly are well represented in the photo on the Internet.

instagram viewer