Heat-resistant tile or a beautiful stove for many years

Why can not I use the normal lining material?

Heat-resistant tile is an indispensable material for finishing the furnace walls of the chimney, fireplace or furnace outdoor barbecue.Work with it allows the use of rough bricks, which were already in use, it will cost you much cheaper than buying new stones.Also, it can help "rejuvenate" the appearance of old instruments and to create the most diverse design.

Why is it necessary to use a tile?This is due to the fact that a simple tile can only be used at temperatures up to +80 degrees Celsius.Being exposed to the influence of higher temperatures, it begins to crack and lose their solidity.Therefore, finished with a fireplace or stove in such a material, it can be assumed that the money for its purchase were thrown out to the wind.The same applies to adhesives for finishing hot surfaces.Only heat-resistant adhesive is able to successfully withstand high temperatures and it does not lose its adhesive qualities.

Note!Choosing a heat-resistant tiles, be sure to check the sellers certificates, because only quality stuff will serve you for years to come.

Heat-resistant tiles and its characteristics

As mentioned above, the heaters need to trim only a special tile that is not afraid of high temperatures.Consider the reason:

• This material is not flammable, therefore absolutely fireproof;
• reliability.Tiles can safely tolerate heated to 1300 degrees Celsius, while it does not crack, does not fade and does not lose its geometric shape;
• She also freezeproof, allowing its use for the furnaces, which are located on the street;
• Due coating fireplace or stove this material increases its heat output.

Note!When facing the stove warms up longer, but its efficiency increases.

In addition, the facing material has a huge range of color and texture, so it is possible to arrange the heater in any style conceived.Also lining will easily maintain the unit clean, as tiles are very easy to clean.However, completely ideal material does not exist.

There are disadvantages and it.He is only one, but serious enough - this is the price, which is an order of magnitude higher than the price a simple tile.Except for this drawback, in all other qualities such tiles is an ideal option for facing hot surfaces.

The glue finishing material?

Heat-resistant tile adhesive - it is an essential requirement for quality work, because no matter how good was the facing material from it will be of little use if it will fall due to poor adhesive.High-quality heat-resistant tile adhesive must have the following characteristics:

1. Heat resistance.The ability to safely carry a strong heat, with no cod;
2. Moisture.The adhesive must not only tolerate high temperatures, but also easy to handle with high humidity.This is necessary for lining furnaces in baths or on the street;
3. No smell.This factor is important because low-quality adhesive can when heated give off an unpleasant odor;
4. not be volatile, that is, there is no need to ventilate the room;
5. Frost.This factor is important for finishing stoves located in the street.

Note!Choosing the glue carefully study the manufacturer's instructions to avoid it turned out that the composition is not specifically suited to your case.