How to choose paint and how to calculate the volume of the tube

paint Calculation pipe

order not to make a mistake and buy the necessary amount of paint to do the calculation.Often uses the standard formula - comparing paint consumption per square meter of surface area and required painting.In most cases, this formula has the label banks, so difficult to make a mistake.The area of ​​the painted surface on the fact - the tube - the calculation is made as a cylinder square.From here you can learn how to calculate the volume of the pipe.Summary znacheniekak formula defines a length of pipe work for the cross-sectional circumferential length of the product.Can be determined by results required volume of paint.

paint Types

Distinguish:

• oil paint (for riser cold water),
• nitroenamels,
• latex,
• red lead.

Before buying paint - Read the instructions on the label of the can.

Direct staining tubes

not need to invite experts for this, builders and other coloring tubes -. The case is simple and does not require special physical and mental abilities.Important:

• not produce staining outdated coat of paint, rust,
• not recommended to paint the cold pipe, at the bottom of the tube is condensation, which do not allow you to perform high-quality staining (need a bit of heat pipe).Particular attention should be paid to chimneys, paint should be in the warm season, in any case, during its operation,
• after grinding should be applied to the surface of the pipe primer, it will improve the reaction of the metal and paint,
• use various tools for painting:brushes, cans, rollers for hot pipe is better to apply spray,
• change the direction of the stroke, it will be better the paint applied to the surface,
• always lead pipe volume calculation and ink consumption, it will in the future to avoid unnecessary wastage of money.

Remove paint from tubes (in the case of the staining effect) will help white spirit.Use it desirable gloves in compliance with technical standards.