As well qualitatively to clean their hands - the procedure and methods of work

Well and today - a fairly common source of water in the private sector.The cost of its arrangement is significantly lower than in drilling (even the most simple - on the limestone), and the water quality is no worse.But that it remains at a consistently high level, this artificial reservoir requires systematic care.

recommended frequency of maintenance activities - at least 1 time in 1.5 - 2 years .If the source is in an area where no one lives permanently, which means that the well is operated from time to time, then the time limit must be reduced by half.

However, in some cases it is advisable to conduct "unscheduled" work on cleaning the well, as the decline in water quality can be caused by a number of circumstances, it is not dependent on compliance with the rules of Operation and Maintenance of an artificial pond.How to define it?

Signs of excess fluid contamination

1. unpleasant smell coming from the source.
2. turbidity, change its color and flavor.
3. level downgrade.
4. appearance of plaque on the surface in the form of a film.
5. Characteristic mucosal layers on the inner walls of the well.

reservoir pollution reasons are more than enough - the appearance of cracks in structural components, ingestion of foreign bodies, damage to the waterproofing layer and a number of others.The objective of this article does not include a detailed examination of all the factors that negatively affect the quality of the liquid.We will understand only how to organize and carry out cleaning the well with their hands.

Operation (mechanical method)

clear that without pumping water thoroughly clean the wall will not work.The question is - how convenient will it work?In terms of comfort better than a well drained, and then start the cleaning.But pumping of water will take time, and slime (mud) can have time to dry out in the top of the log house (logs).This greatly complicate the work.

If the well is shallow, then, as an option - set the ladder (although it will have to prepare a sufficiently long), and the lower the water level to fall, at the same time producing a wall cleaning and inspection in order to identify obvious defects (cracks formed shells and soFurther).The advantage of this technique is that in parallel with the mechanical cleaning of the walls can be good to clean out the dirt residues.

a sufficiently great depth "mine" the descent into the well and its processing is performed in parallel with the pumping well water.But at the same time the employee does not use the stairs, and special lines, which are held by a winch.

Next is cleaning the bottom of the pond as well as a filter element of autonomous water supply system (if installed).If the filter is installed the bottom, it is dismantled, it fed out and there it is made flush or update material (depending on the type of the cleaning layer).

final stage - complete disinfection of the barrel.

to work on cleaning "mine" will definitely need an assistant!

First , working to ensure the safety.

Second , who is surely necessary to raise the top (and then down) a bucket of mud.If you work alone, the cleaning process will be delayed for a long time.

What do I need?

Now it becomes clear that you may need for such an event:

• Bilge pump.
• Devices for lowering into the well (stairs, safety belt, hoist, slings, or sturdy rope).
• Tools - spatula, trowel, stiff brush (preferably metal) bucket.
• Materials (if necessary minor repairs) - sealant + DSP solution "liquid" glass and the like.
• equipment items - boots (rubber), headgear (helmet, in extreme cases, the old cap).Gas mask - that no skeptics have claimed, and plus it just will not.Even if the concentration of gases in the "mine" and the small, the long stay in such a well is required to "backfire".Therefore it is better not to risk it.

If necessary

• Updates (restored) clay "lock".
• equip the new bottom filter.

that preliminary check

level gassed .This increased concentration of gases in the barrel of the well - one of the most common causes of death of workers.Such a device, as the gas analyzer, the household is not, therefore, rarely anyone there.Check the security is possible by means of the flame of a candle.When lowered into the mine, it does not change, then everything is OK.Change the "tongue" level (attenuation or on the contrary, increase the flame) - a clear sign of flatulence.

Council

Quite often there are recommendations for cleaning the wells with the help of drainage pumps.It should be understood that such work, though effective, but only in relation to the water - walls themselves of plaque, it does not save.Therefore, the most high-quality processing of the inside of the well can only be achieved manually.