Connect the washing machine to the water supply and sanitation : how to connect to the water , to water and to bring the drain to the sewer

After selecting the desired model of the washing machine and shipping it home before eachthe owner of this technique appears task to establish a new unit in a suitable location, and then connect to the machine communications.

issue machine installation site long before the acquisition should consider.The most common and frequently used option - to put the equipment in the bathroom.It is selected in most cases.However, owners of tiny bathrooms often decide to install the machine in the kitchen.These options are roughly the same in complexity, since access to water supply and sanitation will be free and in the bathroom and in the kitchen.

technique is much less established in the hallway, because in this case it is necessary not only to make room for cars, but also to bring communications that can present difficulties.The compact machine can also be set in the closet, organized discharge of the toilet.

Before tackle connect the washing machine to the communications, you need to remove the packaging from the equipment and remove the parts that held elements of the machine during transport.It's about bars, bolts and other fasteners.Without their removal include the machine is impossible, as this may damage the drum and exit from the system equipment.

unscrewing the transit bolts in the remaining holes after they are inserted into the plug of plastic.Do not forget to put all the removed parts together in one place in case you need to contact the service.

To perform this stage of the installation of washing machines, should prepare flexible hoses and rubber gaskets for sealing joints.It is also necessary to ensure sufficient pressure in the pipes and water purity.

Connecting appliances to the water supply can be carried out in two ways:

Using a mixer, in which cuts tee. so you can quickly connect the equipment, but this method is often chosen as a temporary option.For such a connection you will need a hose with a sufficient length.If the washing machine is installed in the same room with a toilet, possible to connect a hose through which water is supplied to the cistern.

With the help of a separate valve. in a selected area to be threaded water pipe, then install the valve.This may be used as a crimp sleeve and the fitting.Water would then overlap after each washing process.With such a connection is especially important to establish a protective mesh filter that excludes ingestion machines mechanical particles.This filter should be cleaned regularly.

Intuitively, this connection process, refer to the following video.

Organization drain the water from the washing machine is carried out, taking into account such nuances:

If the technology is not a special non-return valve through which water flows in only one direction, it is required to take into account when installing the machinerecommended by the manufacturer level placement of the exhaust hose.The data on the maximum and minimum value of the nozzle position Limits need to look in the manual.

easiest way to drain the organization is to move the water in the bath.However, securing the drain hose on the bath rim is not considered the best option, because the random displacement of the nozzle will lead to the pouring of water on the floor.It is best to organize a fixed drain, in which you will not have to worry about the risk of the hose and pour the floor of the room.

For a more reliable connection for draining drain system unit to the sewer pipe is required to buy a separate siphon placed over the knee tap, designed specifically for washing machines.This variation connection eliminates the risk of leakage, and ensure reliable water abstraction.

When the thickness of sewer pipes more than 4-5 cm is possible to withdraw water from the washing machine directly into the sewerage system.In this case, be sure to apply the sealant.

When working on the organization of abduction and flow of water in the washing machine are complete, you need to:

• Align the appliances using a level. Through such actions vibration during operation will be minimal.If the floor at the installation site is uneven apparatus should tweak the adjustable feet.Variant with supports made of wood, linoleum, or other materials is undesirable.After twisting the legs necessary to check how stable equipment.To do this, click on the little corners on top of the unit.If the machine with the bend, continue to regulate the feet.
• Connect appliances to the mains. To do this it is important to ground the switchboard to connect the unit to the wall socket 3-wire type, as well as to conduct a thorough grounding wire insulation it.
• Enable test washing and evaluate the performance of the machine. all right, if the tank is filled with water for the right time and at the same time you will not see any leaks.Further, the drum starts rotating, and after 5-7 minutes after entering the water begins to heat up.After completion of the program will drain the water, and the extraneous sounds will not be within the art.