The angle of plasterboard : how to make

Plasterboard has always enjoyed great popularity among the entire range of finishing materials.With it you can create any surface geometry, and complexity, and the work takes a minimum of time and effort.But in order to get a perfect result, you need to learn how to make smooth the corners of the drywall.This is not only aesthetically, but from a practical standpoint.Today we will talk about how to make the angle of plasterboard with their hands.

need to create smooth angles

When plating the walls of plasterboard or creating individual designs, for example, boxes or partitions, it is important to properly mount angles.Otherwise, the work will look at least unattractive.Uneven or rather weak angle also lead to the fact that the building will collapse quickly or deformed.Special mounting technology provides additional mounting point.They enhance the strength of the assembly and allow it to withstand the various loads.

If you make plasterboard paneling, but do not pay enough attention to the corners, then very quickly at the intersections of sheets will crack.Below we describe several technologies for creating drywall corners, which are applicable for construction of niches, boxes, walls and even cabinets.

There are external and internal angle of the drywall, technology creation which has its own characteristics.Let us consider in more detail each of them.

Inside corner of plasterboard

If you sheathe the walls, making a cabinet or niche, without everything neat interior angles simply can not do.Make them quite simply , the main thing - to follow the instructions and stock up on the necessary building materials.Fortunately, they will need a little bit.

to work you need to make the metal frame of the rack profiles.Depending on the functionality and design of the future burden on choosing different types of profile.For example, to mount a strong inner corners of the ceiling of plasterboard, you must purchase rack profiles PS , or CD.It is important to choose a quality profile, if you do not want it to be deformed, and over time has spread through the wall cracks.

For installation you will need to connect the two pieces of metal screws Profile length of about 90 mm.Self install a 25 - 30 cm is no longer to obtain a stable structure.The distance between the bindings to a greater extent depends on how hard is the foundation, and for interior drywall corners need maximum rigidity , otherwise they fall off under its own weight.

More one requirement for setting profiles in the inner corners - the existence of a perfectly flat and smooth surface.Fortunately, drywall by itself is perfect in this regard and did not require additional alignment.

How to make the angle of the profile for plasterboard:

1. Take a pair of rack-mount profiles PS to mark their marker in the ground for future fixtures.Place
2. profiles perpendicular to each other so that one side face lies against the face of the second.The result should be a right angle.
3. Drill drill with a nozzle of suitable diameter through holes in targeted areas.
4. Connect profiles with screws.
5. Along the perimeter of the angle, set the guide profile PN and insert the resulting tight angle.
6. Fix angle screws in the guide profile.
7. Pick up the sheets of plasterboard.In the corners it is best to install the plate with the "native" edges, sharpened at 45 °, so that the seam left tidy.
8. If plasterboard already cut off, use a knife and sandpaper to chamfer of 45 °.
9. stick at the junction of the net strobe , smeared a little to putty , and press the angled spatula. Thus go over the entire area of ​​the inner corner.

Outer corner of plasterboard

To make the exterior angle of the walls of plasterboard, act a little differently.To do this, you do not need to create a separate connection frame as profiles on the outside do not attach.Construction outer corners involves the use of two perforated metal or plastic profiles which simply puts on both sides of the wall (better to choose metal, because they are stronger and more durable).

During fixing drywall, make sure that he was with the uncircumcised edges.Otherwise, you will need to chamfer the depth of ½ of the sheet thickness.To attach the rack profiles to perimeter use metal screws.

When you attach a profile, the coupling area putty plasterboard wall will be increased, which will create an additional guarantee of strength and durability of finishes.Please note that during the fixation sheet to the angular distance between the carcass profiles screws should be reduced.There will also be no harm take care of additional sound insulation of walls, especially when it comes about repairs in a city apartment.By itself, drywall little protection from noise, so sound insulation material must be laid between the frame and the sheets until they are secure.

Yet another feature of the design of the outside corners of drywall is that there is a blank space between the sheet and overlapping.It can idle idle or benefit, hiding a variety of communication and cables.

Important: chamfer angle of 45 ° should be removed without fail.This is to ensure that the metal area does not seem to fit well and placed in a recess created.Also, when shpaklevanii seams solution clutch surface area becomes larger.

How to make an angle of plasterboard with their hands:

1. Prepare the necessary materials and tools : Construction Law, roulette, level, screws, glue, gypsum-based, perforated metal profile.
2. Check angular profile on the straightness along the entire length.Since it is made of a flexible material that can bend during transportation.If detected the slightest bend, align it does not make sense - it is better to postpone this material for tougher jobs.
3. vymeryat length of tape angle.Corner profile must be shorter than the length of the angle 2 - 5 mm.
4. Attach the profile to the angle of the surface and strongly push the entire length of the construction rule that in the interval no choice slightest gaps.
5. Without releasing rules apply and monitor the level of verticality of the corner.In case of deviation from the norm or press release.
6. Lock area in a strictly perpendicular to the floor position and attach it with screws to the plasterboard wall.Only after profile securely fastened , you can remove the rule.
7. Prepare plaster glue, spreading it to the consistency of thick putty.Apply it with a spatula on a shelf angle profile is quite thick.It is important that the glue filled all the voids between the profile and the gypsum boards.
8. Wait a little glue to I began fasten, and then remove the screws and promazhte holes left by them.Remove excess glue with a spatula, until he froze to the corners turned smooth and neat.To this end, each side, tip spatula is strictly perpendicular to the corner and spend one movement top-down , «cut the" glue.

When the glue is dry, carefully polish the surface.You can then proceed to the primer, spackling and decorating.

methods of fastening drywall

method of fastening drywall to create angles depends on the nature of the device this angle.So, if you frame is sheathed in a single sheet, the adjacent elements of the outside corner will be, as it were superimposed on each other.For this reason, the end member of the drywall in a corner must be cut to the gypsum (it is necessary to completely clean off a cardboard envelope).If this is not done, putty angle will be much more difficult.

When installing drywall interior angles is also recommended to clean from the cardboard layer.If the T-shaped dock, end parts are cut at an angle of 45 ° for more convenient spackling .

If you sheathe frame in two sheets of drywall, then the elements are bound to shift.

Finishing drywall corners

If you deal with the installation, the finish drywall corners will seem trifling business.Even those who have never worked with putty mixtures, can easily cope with the finished surface of the drywall.But before you pick up a trowel, construction and corners must be covered with an adhesive primer deep penetration.It protects material from moisture from putty and give it greater strength.

coats are very popular German manufacturer Knauf, in which quality can be 100% sure, though at a fairly high cost.Apply the primer can be a roller or wide brush building, carefully treating every centimeter of surface.When the drywall is dry, you can begin spackling .

How putty drywall corners:

1. First, apply the putty on deepening left screws in the corners, and then proceed to the processing of seams and joints.
2. When operating at joints use a reinforcing mesh its cutting into pieces and gluing sheets over compounds, including and in the corners.Gluing on the net can be normal building PVA .
   
3. After the glue has dried, apply a coat of putty and flatten it as much as possible.Do not try to immediately get a perfectly smooth surface - even for professionals is out not always.When finishing outside corners first check flatness using a level, and only then proceed to sanding.If the deviation is detected, apply to the desired location still little putty .
4. After drying putty in the corners of the drywall abrade the surface with sandpaper medium-sized grain.Thus, you get rid of streaks and bumps.

To summarize, we suggest you familiarize yourself with helpful training videos on the corners of the drywall and the specifics of their putty :

joints in structures of gipsokatona are the most vulnerable component.Due to the high brittleness of the material to obtain a perfect joint angles it can be very difficult.At the same time the corners - it's the most visible part of any structure where irregularities and defects immediately apparent.That is why it is important to use direct metal profiles and to spare screws for attaching them.The only way to get accurate internal and external corners in drywall constructions.

angles of plasterboard: photo