Washing machine does not spin : the causes , what to do , why does not spin the laundry , spin is not working

More recently - justa quarter of a century ago - the presence in the house washing machine can boast not every average citizen of our country.Today, however, this "miracle of technology" can be found in almost every apartment.And, if earlier, the hosts was enough that the laundry is washed without them, but now the washing machine more demanding: in addition to its primary function is to squeeze it, and sometimes dry clothes.It has become so familiar that stiralka no spin mode is considered to be almost useless thing.

In this article, we will tell you what to do if a washing machine has ceased to spin the clothes: in some cases, you can solve the problem, and what will have to call the master.

In some cases, without the help of a professional master repairman can not do, but there are situations where disruptions caused by the washing machine not a serious problem that can be solved even without having special knowledge in household appliances.

If your washing machine is more or less contemporary sample, then it probably has several washing modes for different types of tissue.Some fabrics require particularly careful treatment.As a rule, it is silk or wool.

To the drum of the washing machine can normally be rotated at high speed (namely, this speed is required for spin), it is necessary that the load is distributed evenly on it.If in the process of washing underwear in a bunch of strays, the drum can not reach the desired speed, and spin occurs.The problem can be solved by force completing washing, pulling the laundry, distributing it evenly and restart the spin cycle.

sewers sometimes washing machine does not spin not because of some problems in its mechanism, and for external reasons.One of these reasons - is clogged sewer.To start the spin cycle, it is necessary that the drum of the washing machine was devastated, that is, the water merged.But this is impossible if the sewage exhaust blocked due to blockage in the pipe.In this case, the water remains in the drum and the spin cycle may not start.

Forgetting to turn out his pockets before washing clothes, we put the washing machine in serious danger. forgotten in the pockets of items - coins, paper napkins, tickets, matches, chewing gum and other such things - could cause serious damage. Most often it all falls into the drain system of the unit, thereby preventing its normal operation.

To determine whether this is the problem in the first place, remove the drainage filter.It is in one of the bottom corners of the washing machine, with the small door on the front.How to remove and clean this part, detailed in the User's Guide.

Another element of the drainage system, which can become clogged - is the impeller.It is located directly behind the drain filter.Pull it is impossible, but can be evaluated for the ingress of foreign bodies with the help of a flashlight.

completes our survey checking the drain hose.If the blockage formed in it, the hose must be well purged, and even better - rinse under a strong jet of water.

The removal of the obstruction, refer to the video channel "Repair of washing machines - video."

If after the diagnosis carried out by yourself you are unable to establish the reason why the washing machine does not spin the laundry, then the problem is more serious, and deal with it on their own will be more difficult.For professional help should be treated in the following cases.

Modern washing machines - is a complex electronic device that have smart features.Therefore, the problem in any element affect the entire system.Most new models stiralok the sensor, retaining the water level in the tank.If this sensor is not all right, it may signal that there is water in the tank, when in fact it is empty.

If before revealed problems with the spin, the unit published the background noise, while draining the water, most likely cause of the problem lies in the pump.If this item is the washing machine is broken, the spin cycle will not start.To identify this kind of damage very easily.Free access to the pump impeller and, without dialing into the machine the water, run the spin cycle: if the impeller does not turn, then drain pump is defective and needs to be replaced.

About pump replacement, refer to the video channel "Wash +".

Clarification of the reasons leading to a fault in the drain pump, see the following video.

tubular heating element or a heating element - this is a very important part of the washing machine.If it becomes impossible to go out of order, often washing process itself.Most often heater breaks due to poor quality of tap water (for example, too hard) or the use of household chemicals with aggressive chemical composition.

When the heater is defective, the water can not heat up to the desired temperature and washing will stop automatically.Current models of washing machines is output in this case an error message.

To replace heating element of LG washing machine, refer to the video channel Vladimir Khatuntseva.

tachosensor - is another important element in the device of the washing machine, about the existence and purpose of which is known not to everyone.Tachosensor need to control the engine speed stiralki.When the number of revolutions of the engine is reduced (eg due to overload), tachosensor signals, and operation of the unit can be stopped.If the sensor is broken, there is its false positive.Problems with tachosensor may arise for various reasons, but most often it is due to a problem in the wiring, connecting it with the "brain" of the machine.

work stability of the washing machine work depends, primarily, on the health of the engine.Engine - it is a complex device, so repairs are best left to a specialist.However, before applying to the master, you can try to diagnose yourself.To start, you need to disable stiralku from the mains, push it away from the wall and remove the back cover.Further, we recommend that you take pictures every step, in order to then collect everything exactly as it was.

Carefully remove the engine and check the integrity of all its elements.For example, the carbon brushes can wear down - in this case, they become thinner and covered with soot.

In addition, the engine may get slightly wet due to the fact that somewhere formed leakage.For further explanation of the problem, it is still recommended to call for professional help.

Example repair Bosch washing machine that is no longer pressing on the 6th minute due to engine failure due to ease off the magnet, you can see in the following video.

Software and hardware module - a kind of "brain" that controls the operation of the washing machine.He is responsible for the programming and sensors.If the programmer having trouble, it reflash or reset all settings.These problems may occur because of the differential voltage or the ingress of water into the unit.The reason for failure is often also becomes a factory marriage.

To replace the electronics models in the washing machine, see the following video.

If not expired warranty period, it will be better to ask for help in the service center.This should be done immediately, without attempting self-diagnosis and repair.The fact that the warranty is not received electronics, which have already been repaired.

Problems with spin can be prevented, if the time to pay attention to the failures in the washing machine.The fact that there are any problems, they say the following "symptoms»:

• after the wash and spin, laundry is still too wet;
• in the washing machine makes strange noises: hum, tapping, etc .;
• water suddenly began to merge more slowly than usual.

Do not forget about prevention.After each washing machine need to spend a few manipulations.Firstly, the rinse tray for washing powder.Second, wet dry cloth seal gum on the hatch and clear it of debris.Third, drum dried, leaving the car door open for a few hours.

To care for the washing machine should be selected household chemicals properly.Use only cleaning agents that are designed specifically for this type of household appliance.