TV table with his hands

TV - an indispensable attribute of any house.Current models are mounted on a stand or hung on the wall - it all depends on the interior.But the presence of special furniture required anyway.Related devices and equipment should be placed far away from the TV.Yes, and a collection of CDs usually takes a lot of space.TV table made with their own hands, perfectly fit into the interior, as the owner of the house will be done in full accordance with his taste.

TV benches made of wood

materials

For making wooden cabinets The following materials are used:

1. CPD - the most popular material for the manufacture of furniture.This is due to its properties such as:

• large variety of shades;
• ease in handling;
• affordable price.

2. MDF - Fiberboard also perfectly suited for the manufacture of cabinets under the TV.It would cost more than particleboard, but also last longer.In addition, the MDF has its advantages:

• environmental friendliness;
• low weight;
• homogeneous structure.

3. Natural wood is more difficult to process and has a high cost.The undeniable advantages of the material, its appearance can create a beautiful, rich furniture.The wood is different:

• resistance to the environment;
• strength;
• environmental friendliness;
• durability.

Getting Started

primarily determined with space for cabinets under the TV and its size.product configuration depends on TV settings and technology, under which it is intended.Its appearance should be combined with the room decor and fit her style.

then compiled tables drawing under the TV, which specifies the dimensions of parts and their configuration.

Based on these schemes, carried out a detail showing the number of elements and their parameters, such as:

• lid, bottom and shelf - 3 pcs.(1600h400 mm);
• desk - 4 pieces.(100h382 mm);
• facades - 2 pcs.(136h458 mm);
• sidewall - 2 pcs.(142h400 mm);
• average stand - 1 pc.(142h382 mm);
• back strap - 1 piece.(100h1600 mm), etc.

From these dimensions it is clear that the result is a long TV table, but it all depends on the willingness of the master, the size of equipment and availability of space in the room.

under small enough to make the TV a little "stand" with a minimum of parts.

Tumba chipboard

For the manufacture of chipboard cabinets need:

Materials

• particleboard - are commonly used sheet thickness 16-18 mm;
• 3mm plywood;
• PVC edge;
• SCREW;
• screws;
• plastic caps;
• telescopic rails;
• accessories;
• putty;
• nitro.

If the door is planned to be transparent, the glass is purchased.

Tools

• jigsaw;
• drill;
• drill;
• screwdriver;
• screwdriver;
• layout tools.

Cutting products

1. on paper in accordance with the drawing transferred all sizes of details and patterns are drawn.
2. Pattern superimposed on canvas CPD and fixed clamps.
3. With jigsaw neatly cut stone elements.
4. edges sanded parts.

TV Stand - Build

1. Connect the frame parts.In this case use several options:

• drilled holes, and sits on the shelf boring machine;
• fastening components is carried out using screws or SCREW.Caps screws recessed into the fabric, and then masked with stickers;
• collect details on Furniture eccentric screed.But it should have the skills to work - if inaccurate and incorrect drilling depth calculation for securing the through hole can get.

2. Mounted shelves and doors.
3. Boxes are collected as follows:

• inner width of pedestals subtract double thickness side walls "tray" and the width of the guide - thus calculated size of the back and front walls;
• construction height arbitrary;
• box depends on the depth of the same parameter tables minus the thickness of its walls;
• bottom structure often made of hardboard - material cut-to-size box;
• facade covers both sidewalls.

4. Secured fittings.

5. Installed legs.

6. The surface of the structure is treated with sandpaper and apply two coats of putty.

7. After drying, the material details of the newly sanded.

8. Stand painted nitro.

The resulting structure is not necessary to paint - it can be covered with veneer or foil pasted.

Please note

In the manufacture of cabinets under the TV should pay attention to some points:

• On the back wall of the product, be sure to make the holes for electrical cords.
• Large TVs usually have low pedestals, and vice versa - small models look better on higher supports.Optimal design height - 50 cm from the floor.

• At high gravity equipment instead of feet better to make a stand made of particleboard or simply install a stand on a flat surface.

• If the product cover made in a thickened form, it will look more solid.
• Ribs should be located at least every 400 mm length tables.
• In a small room ideal option would be a corner TV stand - it takes up very little space.

Glass TV table

Bollard made of glass, looks very elegant - no wonder such furniture is becoming more popular.

There are two ways to create a design with their own hands:

1. Buy package details glass coasters on furniture stock.The catalog offers a wide variety of stone under the television picture, the price of such structures is readily available.Independent work will be to assemble the product.Plus this option - quality processing of glass and other stone elements.The home is difficult to achieve such a result.
2. manufacture all parts of the glass cabinets themselves.

If you choose the second option will require some skills to work with glass.

How to make a TV table made of glass

Procedure in making a rectangular design size 100h40 cm:

1. acquire materials:

• 4 pin threaded M-10 and ø 10 mm;
• chrome pipe ø 50 mm;
• 16 plastic rings - the gap nodes;
• silicone adhesive sealant.

2. Defined the size and configuration of the product and draws his scheme.

3. Ordered in the shop all the glass parts with a thickness of 0.5 to 1 cm (depending on the loads on the curb).

4. The turning shop run 4 top mounts made of stainless steel or aluminum.

5. Using a grinder tube exactly perpendicular sawn into sections:

• 150 mm - 4 pcs .;
• 550 mm - 4 pcs .;
• 50 mm - 4 pcs.

6. The edges of the pieces processed file.

7. marked off on the glass and degreased place of attaching the upper supports.

8. Apply a layer of transparent silicone adhesive and using the clamp parts are pressed against the glass.

9. After drying, removed the remains of the mixture.

10. The second and third canvas stud holes are drilled.This is done using a drill and the cylindrical crown with a diamond-coated glass.Holes drilled for better preformed template.

11. Topsheet tables with supports placed on a flat surface.These studs are screwed into threaded holes, which are then put on the pipe segment (150 mm).

12. Next, the assembly is in this order:

• glass;
• pipe - 550 mm;
• glass;
• pipe - 50 mm.

13. Between the glass and the pipe on both sides is required to set the gap nodes.

14. At stud lower supports are wound and gently, effortlessly, tightened.

All design details can not look to the shops and enjoy the workshop.

This TV table, the price of which is much smaller compared to the finished product, to decorate the interior and is able to withstand considerable loads.