Sticker self-adhesive film : step by step instructions

It happens that in time the familiar interior starts to bother, it becomes boring to see the same wall.I would like to diversify the interior of the room and freshen up.And if the furniture does not get me in any desired, you can dramatically change the appearance of the premises without significant cost.Today we talk about a simple and inexpensive way to change the look of the room by means of self-adhesive film.

The name reveals all the secrets - the film adheres to the surface itself, we just need a little intervention, so as not to spoil the beauty and material.In the construction market this inexpensive and attractive finishing material appeared for a long time.Each year the self-adhesive film is becoming more popular, especially because of the ease of use, wide range of colors, possibility to choose the desired color and pattern, as well as cheap.What else do we need?We go to the store to select the appropriate option, and only a few hours to change your interior and make its own "flavor".

Let's talk about the features of

film are the people who have already dealt with the film know that this material is very naughty and you need to adapt himself to stick it to the surface evenly, without bubbles and streaks.

On sale you can find many different types of film for different surfaces.This can be a special car film product for furniture, walls, tile and other smooth surfaces.Regardless of the type of self-adhesive, the film combines one technology - the upper part of the film is a decorative fabric with a pattern or design.It can be colored, glossy, reflective, and monochromatic, while the lower part remains unchanged and is a sticky layer or adhesive surface.With self-adhesive film can be quickly re-design living space and make a reality of their small design decisions.

film Advantages:

• resistance to moisture and high temperature (80 ° C to stand);
• wide selection of designs, patterns and textures;
• versatility - the film can be applied to any surface: plastic, metal, wood, cork, gypsum board, plywood products and ceramic tiles.

help of professionals you will not have to ask, to cope with the task, you can own.The main thing - is to learn the basic nuances of working with self-adhesive and patience.you will enjoy an updated interior Within a few hours of hard work.

In what room can be pasted film?

It was agreed that the film can withstand high temperatures and is not afraid of moisture.Caring for it is very simple, it does not remain greasy stains, dirt, and the dust settles.Because of the universality of the film is often used to decorate any room, from the hallway and ending with a loggia decorated.

Where to stick the film:

1. Kitchen.Regardless of whether you live in the private sector, in the country or in an apartment house, you can freshen up the furniture with the help of the film.The kitchen furniture spoils most rapidly, due to high humidity, vapors and not always properly thought out ventilation.As much as we might wish and change the furniture in the kitchen will not work every 2 years, so pay attention to the cheaper version and update the interior of the kitchen with the help of self-adhesive film.It will keep the surface of the fat accumulation, as kitchen cabinets get dirty, and eventually deteriorate.
2. Toilet and bathroom.These rooms with high humidity the film will be a real salvation.This is the best option (quality plus a reasonable price), which protects the wall from splashes and droplets of water and detergent.With films such soap to wipe the droplets is very easy, and in contrast to the tile, it does not remain on the white soap streaks.
3. If you educate young children, remember how much effort and nerves had to spend to ensure that kids explain that the paint on the walls and doors, and furniture can not.Wash with paint wallpaper is very difficult, and sometimes impossible.Sometimes output after such children's creativity is only one - it is necessary to remove the damaged wallpaper and pasting new.This is troublesome and expensive.A good option - the purchase of self-adhesive film which can be pasted on walls, furniture and doors.Even if the film is painted with, the paint can easily be removed from the surface, or at all, perekleit as inexpensive material and the work does not take long.
4. bright film - it is a good material for creativity.Even if your child is still too small to help you stick the tape in my room, you can trust him the most interesting and responsible part in the renewal of children's - choice of films.A child of secondary school age can cope with the interior upgrade in my room alone.
5. If you have decided to completely change the style in the living room, you should think about how to use the film not only for decoration, but also at the same time to refresh the stools and chairs.

How does the self-adhesive film in the interior, you can see in the photo:

How to glue adhesive tape

film glue, activity at the same time simple and complex.Difficulties arise if the surface is uneven.First you need to remove the defects and then get to work.If you do not, then after a while the film will peel off and swell.

What do I need to prepare in order to successfully cope with the task:

• line;
• pencil;
• building a sharp knife;
• scissors;
• felt a spatula or a special device for gluing the film;
• hairdryer.

You will also need free time to you without haste could qualitatively paste film, a little patience and assistant, if you are going to hang on large surface areas.

begin with training, with a hair dryer (rent a building, since it is designed for the maximum load, the home can not withstand long-term operation and stop working at the wrong time).Feng warm interface and walk in all the corners.This is will be enough, then you will need a hair dryer at the final stage - to warm pasted film.

width self-adhesive film can vary from 50 cm to 1 meter.You need at an early stage in the selection of the material immediately to determine the width.Also keep in mind when choosing a film, and then, to what surface it will be used.When you need to close the old furniture, you can buy a transparent film.It will help hide small scratches and a worn effect, but will not change the color of the wooden structure and antique furniture.If you want to stick on the door with the glass self-adhesive, it is best to choose a mosaic pattern.

Helpful hints:

1. first prepare the surface.Clean it from dust, grease (if kitchen furniture) and remove it from the water (for the bathroom).Clean the surface can be alcohol or gasoline.After processing is necessary to wait until the surface is dry.Good for beginner and comfortable surface - perfectly smooth and even.If you stick to the film matt or slightly rough surface, it is desirable to pre-primed or with a special varnish.As a replacement for methyl suitable wallpaper paste.Wood surfaces, chipboard, plywood products, fabric and just plastered walls must first be thoroughly cleaned from dust and walk acrylic primer.If you see that on the plastered surface can be seen protruding grains, it is best to apply a coat of finish putty, and then a layer of primer mixture.So you can stick the film without problems.Before you start to work with glass, metal or glossy surfaces, the base is first moistened with an atomizer.
2. Expand adhesive tape.Please note - on the reverse side of the fabric is marked with guides.On line you will be convenient to cut the film.When you cut out the material, leave a small margin, enough to just a few centimeters.Use sharp scissors to cut or a special knife.
3. Depending on the pattern, try to cut the film very carefully, without curvature and sections.From that, how well this piece of work, the end result will depend on the will be executed.Agree, as ugly as it looks cut a large figure of the film, if it has rough edges serrated.Begin always cut pattern on the front side.
4. Tricks: if you choose a film for the bathroom, which will mimic tile, then cut better "seam".

Getting Started:

1. In your hands the finished pattern, left neatly separate the film from the paper by only 5 cm more while disconnecting the substrate is not necessary.Try
2. film to the surface so that you have all coincided - the size and shape.Now you can attach the adhesive side of the film to the surface and smooth.
3. Very gently, without fuss gradually separate the substrate from the film and distribute it across the surface smoothing movements from the middle to the edges.You can use a soft dry cloth.
4. priglazhivaniya principle identical with wallpapering.We are "kicked out" formed in the mid-air to the edges and carefully smooth film.So we avoid the formation of large and small bubbles.
5. If you are in the process of gluing saw that you turned the hall or vial, return immediately and correct the error.Gently peel off the edge of the film on the surface, yet she has not had time to thoroughly adhere.If you are late, you will have to start all over again, only to completely remove the film will not be easy.
6. If you want to just paste over a large area (eg, a wall), you first need to thoroughly clean it, dry the surface, and then apply a thin layer of wallpaper paste and without having to wait until it starts to sink in, quickly affix tape, trying to adjust its size.After completing the walk on the updated surfaces with a soft, dry cloth.

Attention!If you bought a film that instantly hardens, then pasting it would be very inconvenient if you do not use a little helpers.To cope with the work to help fine powder or talc.Appeared bubbles can be neatly pierced with a fine needle, let the air and smooth out this place well.

When working with metal or glass surface is first necessary to moisten it with soapy water.Then the film is completely separated from the base paper, and adjust the size.Once all the matches, take a soft cloth or sponge and dry thoroughly surface.

How to stick the adhesive tape, you can learn by watching this video:

Is it possible to remove the film?

After a while you may get bored of the film coloring or drawing and you want to refresh the interior again.How to remove the film so as not to damage the surface, because the film - a strong and durable material.

We want to immediately warn, do not try to paint film - paint will not be good to go to bed on a slippery surface, and as a result you will spoil not only the appearance of the premises, but also your mood.Stick on top of old coating another layer of the film - is not the best option.Therefore, there is only one way out - to remove the old film.

release film according to the rules:

1. Take hot water and a sponge wet surface.If you want to accelerate the process, put on gloves and prepare the water hot.
2. Wait a few minutes until the glue swell.
3. Now you can start the film department.Take a sharp knife or spatula.Work carefully to avoid damaging the surface.
4. If you remove the film by means of hot water did not work, try turning the hair dryer.Once the film is heated, the glue will fall behind the surface and it will be possible to remove the film.Take a powerful hair dryer building, it works better and faster heats the surface.
5. When the film becomes soft and will fall behind, gently pry the corner and pull the tape until it is completely disconnected.
6. If you saw the remnants of the adhesive, they can be removed as follows: solvent wipe the place with gasoline or alcohol.The choice of means will depend on the material surface.

self-adhesive film, is a versatile material that will help to update the interior of the room.If you want to change the situation, do not need to expend energy and money to re-do the repair - buy the film and your life will sparkle anew.