Build Daily

Walls

August 12, 2017 18:05

Plastering the walls with his own hands

plaster walls with their hands is always both interesting and very painstaking exercise.That is why you must always adhere to standard rules, properly preparing the surface for the future scope of work and purchasing construction material with improvised means to properly apply the plaster is equal to it, as well as display smooth plane, regardless of the type of room and squaring.If plaster walls with their hands for the first time, we recommend that you watch the video of this event in our article below.Video tutorial will enable the best possible way to determine all the steps of a process by identifying all the "pitfalls" and get rid of in the future on a variety of errors.

Content

  1. Preparing for self-plastering
  2. Tools Required
  3. Create
  4. solution Installation
  5. rack holding plaster
  6. Conclusion
  7. Video plaster the walls with his own hands

Preparing for selfplaster

If afoot plaster walls with their hands under the wallpaper and painting, always almost perfectly align the plane, as all uncleared and manifest themselves in the future flaws will adversely affect the general perception of the room, whether it is kitchen, living room or bedroom.

Tools Required

When necessary to carry out the plaster walls, recommend advance purchase toolbox that will properly carry out all the stages of finishing the event.

plaster always necessary to have guide rails on which the wizard will build, creating a smooth surface and a plane.In addition, the need to have a level that allows you to specify the location of the surface is necessary, whether it is absolutely horizontal plane or slope angle of 45 degrees.

further recommend to get the trowel with a spatula and capacity, which will have to stir the solution.Trowel with a spatula should be selected, taking into account the front of the work, while in capacity should allow to mix different amounts of solution.Finishing purchases are PPE (rubber gloves) and shampoo, which creates the effect of splendor solution (printing process on the surface).

Creating solution

standard in creating a solution for plaster participates shampoo (gel for washing dishes), cement, sand and water with lime.These "components" avoid the formation of mold on surfaces, cause optimal solution, as well as qualitatively and without removing the large layer it leveled.

It is worth noting that in order to carried out at the proper level plaster walls with his own hands, the solution should be mixed thoroughly, not saving on its composition.

Mounting rail

In order to apply the plaster, you must put in the rack level, for example the same profile required for suspension and other structures.With the rules will actually remove the extra layer, while the application will be provided with a spatula and trowel.

Carrying plaster

When is the plastering of the walls with his own hands a minimum layer of coating material should be 0.6 millimeters, resulting in a plaster grabs and will disappear from the surface after drying.You also need to remain calm in the event that certain not dried pieces of plaster fall from the wall (normal).

After will be carried out all the above activities and the surface dries, require finishing plaster walls with his own hands.As a result, all the microcracks are eliminated, then you can proceed to putty, and other finishing activities.

Conclusion

For the self plaster in all areas need to buy all the materials at hand with the tools, with reference to a variety of videos and pictures never hurts to hold this event finishing at the highest level.

Video plaster the walls with his own hands

For greater clarity, see below video plaster walls.

plaster walls with a solution of Rotband:

plaster walls with their hands on beacons:

instagram viewer