The circuit connection dimmer

Often, buying a new chandelier or lamp, the buyer does not think about the fact that it is not always a lot of bright-burning lamps - good.Sometimes, when watching a movie, TV show, or just to create a spiritual, intimate environment, it would be desirable to reduce the brightness of the lighting.The options for this are several: either turn off the lamp, which is undesirable, because the impression it turns out that they just burned out, or connect dimmer.

Especially because the vast majority of modern lighting fixtures and chandeliers, the possibility of a partial shutdown of certain lamps, generally not provided.They are made only with the ability to connect dimmer , otherwise you need to completely redo all the wiring in the luminaire.

For such cases, complete electrical fittings produced by the plant, there is a light switch - dimmer .In fact, it represents, all familiar with the rheostat school program, only reduced in size, with a modern, miniature stuffed, but with exactly the same features.By installing a dimmer light, we are able to regulate a wide range of voltage supplied to the lighting device, respectively, reducing or increasing the lighting in the room.

Wiring dimmer

scheme dimmer connection is quite simple, for a start, dismantle the old switch is sufficient.Place which he held, is quite suitable for installation dimmer.Himself a device that looks like an ordinary standard switch, but on the face instead of keys, set the washer controller.

to connect a dimmer, you need to stock up on a set of screwdrivers, as well as to have a tester or tester screwdriver, duct tape.Wiring diagram shown on the packaging, there is, in principle, only two wires - phase and zero.Connected as a simple switch may be more grounding wire.To install, you do not need to change any existing wiring, simply, if you are connecting an old chandelier with lots of wires, part of them will not be involved.

Wiring the dimmer for the LED strip:

Connections dimmer, can perform every little bit versed in electrical man do his thing, making sure that the power is off, and no one without you will not be able to turn it on.

is not difficult to establish control, changing the old chandelier or lamp.If you need to lay a new line of lighting, preferably still, invite a professional.And if you did, you decide to do it yourself, we suggest that, for clarity, see following article in the video that will answer to your question, how to connect a dimmer.

And one more thing: when buying a dimmer, it is necessary to choose, based on the characteristics of the lamp, its power consumption, and besides, is not worth saving, buying cheap models, they are less reliable and short-lived.Especially popular are the dimmers brand Legrand.

If installation is correct, the lighting will be adjusted quickly and easily.

Video connection dimmer