How to install a lightning rod - mast for a country house - device and operating procedure

In recent years, natural anomalies and disasters are becoming more frequent and more intense.Lightning among them are quite significant place, as evidenced by the attention paid to this natural phenomenon in the media.

lightning in the house can cause very serious consequences, which are impossible to predict.Therefore, the protection of your own home by this natural spark that can in an instant take away your entire property, is an important and essential thing for any home owner.In essence, the installation of a lightning rod is not such a difficult thing, so can do it to every person.

In that lightning strikes

Lightning, which is a spark of electrical origin, as if looking for the most suitable for her metallic conductor that can assist it in the rapid achievement of the land.If you look at any house, which may well be a metal roof, different antennas, chimney, covered with zinc, and similar items, then zipped it represents a clear interest for which you can turn into a disaster.

To protect the house from lightning is necessary to construct a lightning rod or lightning rod.Many homeowners lightning rod fixed directly on the roof of the house, but wiser still would put this separate tower.Why such an option is more reasonable?The fact that lightning is always looking for the shortest path.

Undertake the production of lightning rod

First of all, you must choose a location for the installation of a lightning rod on his site.Typically, lightning recommend setting a few meters from the house, and it can be done even at the border.Furthermore, by placing a lightning rod on the border with the neighbors, you will be able to take advantage of their help during the construction, as a safe haven from the lightning and seize their territory.

choosing a lightning rod height, must be borne in mind that it should be higher than your home is not less than 2 meters.But it should not be too high so as not to attract lightning, it could potentially bypass the party.

Next will need to mount the tower, which will carry the lightning protection elements.The construction of the tower, you can define your own, do not forget that in the middle of it should be a space where to put the conductor, who will play the role of ground.At the top of the tower to install clamps, which need to attach a rod of copper or aluminum, connected via a grounding wire.Dig a hole at least 2 meters deep, install it prepared tower.

Having strengthened tower to the ground, you need to connect the lightning protection grounding.For the arrangement of the ground around the tower is necessary to draw an equilateral triangle in the top of which should drive to a depth of 2 meters of copper rods or rebar, which will play the role of ground loops.Scoring rods, they must be connected together via rods of the same material.

At the final step is to connect the lightning conductor to ground.And it will be the last operation to create a reliable protection against lightning.

you to be erected is a reliable protection, all connections must be made with great care.Use Windows Explorer, you can put in a corrugation, to protect it from oxidation, which significantly reduces its conductive properties.To protect the tower from corrosion can be painted, without causing, however, the paint on the lightning protection equipment.