Build Daily

Restroom

August 12, 2017 18:05

Installing a toilet bowl with his hands

click fraud protection

usually replace the toilet is required in two cases: in the course of a full renovation, or because the old plumbing is out of order.To install the toilet occurred smoothly and correctly, you need to consider a number of important nuances of this process and intelligently approach the selection of the most plumbers.

Content

  1. Buying toilet
  2. Removing the old toilet
  3. toilet repair
  4. Installing a new toilet
  5. Video installation toilet with his hands

Of course, such work can be entrusted with a professionalexperts, but self-installation toilet can save quite a large sum of money, which is very good.

process of installing a new plumbing usually occurs in this order:

  • Buying a new toilet;
  • Removing outdated plumbing;
  • repair sanitary site;
  • Mounting toilet and connection with their own hands.

Buying toilet

So, how do how to install the toilet myself?The first thing to do - it's fast, and most importantly - the right to choose the new plumbing.In today's market there are many types of toilet: they are vertical and horizontal;Visor, and the funnel-shaped poppet;with a combined drain sideways or with self-contained.In addition, toilets are separated by the method of fastening a: 2 and 4 mounting points.drain type toilet is better to take the same as it was before, because then will not have to change the supply pipe to your sewer.

Removing the old toilet

second stage of toilet installation - is the elimination of the old plumbing.This process is quite simple, you can make your own hands.First you need to turn off the flow of water into the tank, pour all the liquid out of it and unscrew the hose.Then, unscrew the mounting of the tank and the toilet bowl.During the installation of a toilet in a private house, it is usually secured with a special cement wash.In this case, it can be easily removed with a chisel and hammer.When the toilet is removed, the sewer is best to close the special stopper, because the gases from it are highly toxic.

toilet repair

After dismantling the old plumbing, you can begin to repair the toilet.It is important to align the well floor that the new toilet has become a reliable and fast.

After that, you can begin to work on the basic scheme of the installation of the toilet, which is available on our website.For clarity, we recommend also see the video at the end.

Installing a new toilet

So, to install a toilet, it is necessary to its drain to attach corrugated pipe or rigid pipe, but it is best when the pipe itself plumbing drain comes without them, but then it is important to use a good rubber seal.

Next, prepare the water input.This is best to use a hose of flexible material which is fastened to a water faucet and a toilet cistern.

Next comes the installation of new toilets and strengthening of the floor (see. Photo).

When the base is fixed, it is possible to install a tank or supply pipe from a previously installed.After that, you should definitely check availability toilet.

last stage of the installation the toilet with their own hands - a toilet seat connection.

to secure it in set to sell special plumbing parts, and the toilet has several openings for the threaded connection.

For your convenience, on our website there are detailed photos toilet installation that will greatly facilitate your work!

Video installation toilet with his hands

instagram viewer