Build Daily

Walls

August 12, 2017 18:05

Plastered walls with his own hands

As you know, looks like a putty dry powder, subsequently bred in the water, or cook creamy mass.The purpose of filler - the final alignment of the walls under the wallpaper, painting or other finishing of the walls.

Content

  1. cement based
  2. gypsum-based
  3. on putty Instructions walls
  4. Video plastered walls with his own hands

If you started a plaster walls with his own hands (photoand video you can see right here), the substrate must be dry, firm and well-primed.The primer is needed for protection against mold and mildew, as well as to achieve maximum adhesion to the surface of filler.Sometimes special antiseptic primers used.Apply the primer with a brush or roller.It depends on the convenience and state of the surface.You can also use a primer gun or airbrush.

putty mixtures are of two kinds: on the basis of cement and gypsum.

cement based

putty, cement-base after drying becomes gray.Its main advantage of gypsum is that the viability of the solution is much higher.The main disadvantage - the gray color that stands out of thin translucent wallpaper and paint.It is for this reason that cement plaster is rarely used.

gypsum-based

negative factor in choosing a plaster solution to a short life, and that such a filler is suitable only for indoor use.But the walls are white, after drying and is ideally suited for any kind of finishing.

instructions plastered walls

To plastering concrete and prefabricated walls with his own hands will need two spatula: narrow and wide.The narrow spatula putty we cling to, and then we shift it to a wide.Carefully smear the putty spatula on the first, and then the wall.It is desirable to adhere to the horizontal direction.Emerging surplus remove and passes through the bed clean spatula to level.Putty should be a thin layer, because a thick layer when dry can crack.If there are irregularities in the wall, then do not forget to rub them thoroughly dissolved.To achieve greater smoothness of the surface before use putty can be whipped with a drill with an attachment "mixer".

putty is starting and finishing.First it would be appropriate to put the starting layer and let it dry.The next day, if no defects are found, you can add the final layer.If the defects still show through, it makes sense to use a special sand mesh and sand the surface.Finish coat the walls with his own hands (see. Video tutorial) usually takes place in two layers.

Today there is no shortage of choice for wall decoration: paint, wallpaper, decorative panels, tiles, wood and more.However, the decorative plaster increasingly popular.With plastering solutions of various shades can be achieved huge number of interesting effects, which will be beneficial to allocate your accommodation.

Decorative plaster the walls with his own hands - this stylized stone and brick, and plaster, from which emanates museums and past eras.When using a roller, trowel and brushes of different sizes, you can do just what the soul asks, almost afraid to mess up the wall, because you can always adjust the putty.Decorating the walls of putty, probably one of the cheapest options, but this version contains the unexpected opportunities for the brave people with imagination.

Video plastered walls with his own hands

For clarity, below we suggest to familiarize with video tutorials on plastered walls.

instagram viewer