Shutters with their hands

shutters allow not only to close the windows at night, but also suitable for the reliable protection of buildings during the day.Wooden additions allow to keep in a cool room without interfering with normal ventilation.Produce high-quality shutters with their own hands can be of conventional boards.It is desirable to select a material which has passed the processing antiseptic and ready for subsequent staining.He permanently retain the original appearance and condition.

Step by Step

To shutters made exactly closes the window, it is necessary to measure its width and height.According to him matched boards.carried out sawing edges and fit a desired options if necessary.

achieve structural strength and quality really can be wall-mounted with special hinges.But by the shutters of their tie can not be: the resulting structure is strong enough.To prepare crossbars must measure 15-20 cm (depending on the height of the window) from the top and from the bottom.The width of the transverse reinforcement should be about 10 cm. To secure their installation is required to prepare the grooves "dovetail".Accordingly, the spike-board used for the manufacture of crossbeams should have a width of approximately 3.4 cm larger.

Once the materials and tools you need to prepared to learn how to make wooden shutters on most windows.This will help the owner of the private house attached photo and video materials, as well as the following statement:

1. The manual band saw is necessary to prepare a small groove, which will expand the opening for subsequent insertion of the transverse boards.

2. Hand saw milling produced an increase in the hole to the desired width.

3. On-board untreated crossmember Stamp relatively prepared groove.

4. With universal milling machine made precise cutting boards, which will be installed in the hole.At this stage the system is tongue and groove "dovetail" will be ready.

to the shutters on the windows, made with their own hands, are reliable, you need to fix the cross bar on the main board.It is necessary to prepare the holes and tighten the screws in areas that will not be the same places fixing loops.

After the completion of the necessary to grind wood and achieve its smoothness, lack of chipping and protruding pieces of wood.

Binding loops produced on the new holes from the outside using screws.Keep in mind that the place of the loop fastening to the wall must speak at sufficient length (approximately 5 cm).After training you can do painting shutters and leave them to dry.At this time prepared a location dowels and hinge brackets.

When the shutters are dry, it is possible from the inside to connect them by screwing the center crossbars (two flaps are stacked close) a small timber.It will provide the simplicity and ease of installation.

But from the outside it is necessary to fasten the longitudinal rail, allow to completely close the gap between the doors.Externally, the addition also painted in the base color.After the work is done attachment loops to the holders on the wall, and the beam with cross bars removed.After this step, the shutters will be fully ready for use.

Videos manufacture shutters on windows