How to install sewer pipes PVC self

daily through pipes flows a few cubes of corrosive liquid.There is nothing surprising in the fact that over time the pipes are deteriorating and need to be changed.New PVC sewer pipes - a good solution for a standard apartment, and for the house.

low weight, low priceand easy installation - speak in favor of sewer pipes made of plastic for an apartment or house.A wide range of accessories and components of elements allows for configuration of the sewer route of any complexity.Warranty service life of sewage plastic pipes of about 50 years.

advantages of plastic sewer pipes

Installation and assembly of sewage PVC pipes, afford to produce their own claim to the owner.Light weight, allows for the track and fix pipes on plasterboard walls or piers.

1. PVC pipes can be easily disassembled for cleaning and is also easy to assemble.There are lots of various tribes, tees and audit of inserts with different degrees of bending.The smooth inner surface of the tube has a high capacity and is not affected by overgrowing.
2. PVC Pipes - dielectricity, they are not afraid of stray currents, a destructive impact on the metal.They do not suffer from corrosion-resistant to acids and chemically aggressive environments.Low cost combined with operational longevity explains the high popularity of PVC sewer pipes.

Dismantling the iron and installation of plastic sewer

Remove the cast-iron pipes and install new plastic can be even alone.The turbine, a sledgehammer and a chisel with a hammer - the entire set of required for the replacement of sewer pipes.

1. Remove the cast-iron pipe sewer can be a turbine disc for metal or welding.The docking areas, vertical iron pipes made deep cuts turbine.Then, the pipe is broken with a sledgehammer.Connection Remains firmly stuck in the coupling, are removed hammer and chisel.
2. cast-iron bowl in the docking adapter is inserted into a plastic tube.It is composed of rubber and plastic sleeve cuffs.Next, lay the pipeline in accordance with the plan.The primary tube has a diameter of 100 mm, and for kitchen sinks, bathtubs and sinks enough pipe 50 mm.
3. Note the gravity layer for laying the track.If we take off the release of the central sewer of zero degrees, the starting point should rise by about 30 °.On the track there should be no slack in which water can stagnate.Twists and turns of 90 ° are possible, but it is desirable to reduce them to a minimum.
4. vertical cascade transitions are not not significantly affect the permeability of the sewer system, but the best option for the track - a straight line.The key locations Organize audit inserts for cleaning sewer pipes.These are the connections with the release and screw cap.In case of blockage, you can easily reach the mud plug vibrotrosikom elastic or steel wire, and punch it.
5. When assembling the sewer pipe, the pipe ends can be lubricated with machine oil, petroleum jelly or grease.Since the tube to collect a lot easier.Some artists use waterproof silicone.It not only eliminates the excessive friction during assembly, but also provides additional sealing of the seams.

Connecting the plumbing to the central plastic tube

Locations connect household plumbing for installation, placed tees.If the main riser pipe or have a diameter of 100 mm, a bidet and a kitchen sink installed tee 100h100h32 or 100h100h40 mm.Washbasin and bath Standard Edition 50 mm and toilet - 100 mm.

1. often used for plumbing corrugated exhaust pipes.This is not only convenient for installation in tight spaces, but also quite convenient for prophylactic cleaning during operation.
2. Connections exhaust plumbing pipes to the sewage system is performed by means of sealing gum.In case of poor connection and occurrence of leakage, it is possible to eliminate water resistant sealant.When assembling and installing the toilet, the issue was cemented.

Installing plastic sewage in the house

Laying of sewer pipes in the house will require additional work by digging a trench for sewer manholes or tanks with a septic tank.

1. In the new house, the main sewer pipe can be "drowned" in the floor.For the release, during the laying of the foundation, it is a metal sleeve at a depth of not less than 75 cm. From the foundation to the manhole dug a trench with a smooth groove in the direction of the drain.The slope, is approximately 30 °, it will be quite sufficient.
2. laid-outdoor sewer pipe in the trench, additionally insulated.During normal operation, the water in the pipes is not delayed, but in the case of blockage, freezing could occur in the winter.Sewage pipes of PVC can not open fire to defrost.Only boiling water or taking care industry hairdryer.
3. For warming plastic sewer pipes using polystyrene foam, mineral wool or any other impervious to rot in the ground heating material.There are special flexible tension insulation polyurethane hoses.On the tube wear sleeves Insulating, then made the assembly and laying of sewer pipes in the trench.
4. in the sewer pit, in masonry wall is a hole into which is inserted a metal sleeve, whose diameter is slightly larger than the diameter of the sewer pipe.The plot is carefully reinforced with stone and brick, and then cemented.The sleeve is inserted into sewer PVC, its output should be 25 to 30 cm.