Indeed, many suffer from the fact that some of the walls of the home is not perfectly flat.For the same reason, there can be problems associated with not only aesthetic considerations.It is also important to understand that line the walls of plaster - not the best idea.It takes a lot of time and money, but the end result is very rarely meets.This alignment of the walls of plasterboard would be the best option, which will cost is not very expensive, and the final result at all pleasantly surprised.

important to know that there are two ways of fastening the drywall sheets to the wall:

• mount with a metal frame;
• bonding drywall directly to the wall.

Obviously, the most reliable and popular way - is fixed on the basis of a massive metal frame.However, many owners of this method is not suitable.It is important to understand that the frame itself has a thickness of at least 4 cm. Within the small room is too much, so it is often used is the material sticking to the surface.

The main features of the frame mounting material

Before you make a choice in favor of adhering to the wall of drywall should have some information about another method of fastening material.Immediately it should be understood that this whole process is quite long and difficult, so often they are engaged in it are professionals.

Preparing walls for fastening material

to create even the minimum necessary to treat the surface layer to align the wall.The best way to lose the old layers of plaster or wallpaper.All it takes extra space, which may be advantageously used.This is especially true of small apartments, where every centimeter is of paramount importance.It is advisable to put on the wall primer.Sometimes this step is optional, but in such circumstances, the coating will last a little longer.Also, experts advise handle wall surface antiseptic.This is because after the arrangement of the wall, we have lost access to the interior.

process of creating a framework

The framework itself is quite easy to arrange.It is important that in the end turned out to be the most stable structure and is really strong, that even substantial shocks on it could not break the overall integrity.First, the entire perimeter mounted UD profile, which will be the basis for fixing plasterboard sheets.The profile itself is secured with dowels directly to the concrete wall.The edges of the profile have to go outside.On this basis, will be fixed bridge

Then begins the installation CD profiles, even at that, in turn, are attached sheets of drywall.It is important to do everything so that all the elements of the profiles were at the same level, or a specific curvature of the surface can not be avoided.The first elements of the profiles should be installed on the wall itself, and subsequent -. At intervals of 60 cm is often used in this process and special hangers, which give structure rigidity and overall stability.However, it is only in the case of a groundwood object.

Installation of drywall sheets

Fastening sheets to the design - it is the most pleasant and extremely simple process.For him, we need 35mm screws.The heads of screws should be a little utaplivat themselves inside, so they do not stand out in the future an even surface.If certain sheets of material a bit more required size, should be used special knife cutter for plasterboard.

finishing and finishing process

This finish is the most important process.Almost all of it depends on the final quality and flatness.In places sutures attached reinforcing mesh, which will help hide some surface defects.Nowadays also frequently used, and other materials that can provide additional protection to the surface.After applying the putty should conduct polishing surface.It is important not to overdo it.Sam putty layer should be not more than 2 mm, otherwise possible occurrence of cracks, and sometimes even the material can sprinkle.

Features pasted drywall

Indeed, align plasterboard walls without frame much easier than the classical method.As already mentioned, construction plasterboard walls without frame saves space in the room, and it is a huge plus.

Basic operations in the regeneration of the wall

1. first step is to carefully work on the smoothness of the surface, which will finish drywall.In contrast to the type of frame alignment of the walls, here it all depends on the wall.
2. very important to treat the pre-wall primer.This will improve the quality of stseplivayuschih material properties.
3. prior arrangement surface, be sure to take care of the amount of sheets of drywall.It is best to pre-cut the required amount to the optimal size.
4. On the surface, where the arrangement of plasterboard, drill dowel holes will occur.The number of holes can be different, it all depends on the area of ​​the wall.The screws are screwed in such a way that all the caps are flush.
5. Finishing plasterboard walls without the frame is not much different from the classical method.After the arrangement of sheets of drywall, we need to apply putty.

Basics fastening drywall to the surface

Fastening drywall comes back of the sheets.It is on this surface and the adhesive is applied.It is important to know that you need to apply the adhesive pieces in increments of 30 cm. Most experts advise to apply the adhesive directly to the wall.Sometimes it simplifies the process.After applying the adhesive, the sheets are pressed against the dowels.Very often this process is used a rubber hammer, which helps to create a smooth surface.

It often happens that the wall pretty curve.To avoid trouble with the skin of plasterboard walls without frame, is first to decorate the surface of the wall in small strips that provide maximum surface evenness after end of manipulation.

There are also alternative ways of arrangement of plasterboard walls, but they are more complex, and in some moments and does not guarantee high quality.

price issue and other features of the arrangement of the surface of the plasterboard

Thanks to modern technology, any method plasterboard wall arrangement will lead to success.Certainly, many believe that the framework provides a higher reliability of a design unlike gluing drywall.In fact, things are not so simple.If carried out with plasterboard finish without a skeleton closely as possible, without letting go of the mind every detail, then eventually we will get a chic result.Creating a framework is very often a difficult task, so in this situation can happen a lot of bugs and other nasty things.Very often it is used to create a frame of some unusual elements and the interior of the room, while the adhesive is ideal for drywall surface alignment.

If we talk about pricing policy, it is often all depends on the material suppliers and other significant factors.In itself the wall arrangement will cost considerably more expensive by creating a frame.However, it is understood that the adhesive designed for bonding plasterboard to the wall surface, and does not come cheap.Furthermore, the amount should be large indeed.Also, a lot depends on what area you need to decorate the walls of plasterboard.By itself, the material is inexpensive, but some auxiliary tools and parts can be costly.If we are talking about an entire apartment, it is better to turn to wholesale sales points, where to get a good idea to save money.