Interior wall insulation in the bathroom with their hands

In modern conditions the walls of the home insulation - the most important question that requires in-depth analysis.Fortunately, now on sale there is a huge amount of insulating materials, which are able to make of normal cold buildings warm and comfortable "fortress".Of course, not everything is as simple as it might seem at first glance.Unfortunately, there is a lot of problem areas, it is worth paying attention to.

particularly serious should be treated to an internal wall insulation inbathroom.It is obvious that this room should be insulated with high quality.In the winter in areas where low-quality heating and no thermal insulation, it is simply impossible to be.The bathroom also needs to be comfortable all year round, and this should be remembered.

Fortunately, conduct a full bathroom warming may well be their own hands.To do this, carefully examine all relevant documentation and to draw some conclusions.In the same article we consider the basic intricacies of the internal insulation of the bathroom.Ultimately such events can spend even beginners.

main features bathroom insulation

If you are thinking to insulate the walls in the bathroom, it must be remembered that in this case the most important thing - is the choice of insulation materials.Now on the market you can find hundreds of different versions of these products, but not all of these products are of high quality.Moreover, the direct thermal insulation material quality is not always the deciding factor when choosing these products.

Accordingly, in such circumstances, you need to pay attention to a number of requirements, which will allow to establish the highest quality and efficient insulation material for the bathroom.

• Security.Unfortunately, many heaters have a significant disadvantage.He can relate to fire safety or environmental friendliness.Accordingly, we can not allow the material that will insulate the room, resisted fire.In modern conditions it is because of such materials having large-scale fires.With regard to sustainability, then the situation should also be carefully considered.Own products can produce toxic substances, which for humans can be deadly.Accordingly, for the internal insulation of environmentally unfriendly materials should be avoided, even if we are talking about a large monetary savings.
• low thermal conductivity.In this case we are talking about the effectiveness of the material.Of course, he should not let the heat out of the room.Of course, each material has a different thermal conductivity, but in the first place is to look closely to the products that are highly efficient.Moreover, the lower the thermal conductivity, the smaller material thickness.Accordingly, we save room area.This is particularly important if we are to warm the bathroom.
• durability and strength.It should be borne in mind that each quality insulating material has a high strength.Moreover, such products must retain its shape.If the insulation material breaks down - it is poor quality.Warp insulation also should not.
• Moisture.This is especially important point when it comes to warming bath.The fact is that high-quality insulation should not absorb moisture.Moreover, under the influence of moisture insulation product must keep their original shape.If the moisture in the material will still be absorbed, then gradually decrease the effectiveness of the insulation to a minimum.

When buying a heater, each of the above points should be checked with the consultants.If the information provided is incomplete, should be examined in the product documentation.Most often, manufacturers specify all the details of the use of an insulating material.Some companies directly to their products indicate where it is possible to use a specific material.

Again, save on a heater is not necessary.Any of the aforementioned disadvantages present in the material, can bring a lot of trouble.Particular attention must be disposed of safety material, since it is a residential area.

Basic materials for thermal insulation of bath

most commonly experienced repairmen recommend using only a few materials for thermal insulation that tested experience and time.These we will consider further:

• Styrofoam.Today, the popularity of this heater is growing rapidly.The thing is that this material has a relatively small share, and good moisture resistance.Moreover, the polystyrene has a small size, so do not create any structures for mounting.At the same time we must remember that the effectiveness of this material is highly dependent on the specifics of the installation.If the material between the units arranged on the wall, there are gaps, such insulation is not the best way to preserve heat.In such situations, you need to use a polyurethane foam that fills all joints and voids.Most often occurs fastening polystyrene based adhesive dowels or - depending on the size and weight of the material.
• Mineral wool.This is likely the most common insulation, which is used in the construction of private homes.Unfortunately, the need to build a metal frame for use of this material.Accordingly, if we have a very tiny room Bathing, the mineral wool - not the best option.After mounting on the basis of metal construction insulation hidden behind the plasterboard panels.It should be noted that the mineral wool absorbs moisture, so it is not recommended to use this material in the bathroom.You can try to create a high quality waterproofing, but even this option does not always work.Under the influence of moisture mineral wool begins to rapidly lose their initial properties.Moreover, damp conditions in the material bacteria can multiply.
• polyurethane foam.Experienced specialists claim that the polyurethane foam is the most reliable and modern in every sense of the insulation.As is the case with mineral wool, polyurethane foam must be fixed on a metal frame, which occupies a large part of the space.The interesting thing is that the material is applied by spraying.Accordingly, the two-component liquid substance is used which foams and hardens short time.The good news is that the mounting material does not need to use fasteners.As for the heat-insulating characteristics, the material retains heat well, and does not lose its effectiveness over many years of operation.The main advantage is that the polyurethane foam layer is gapless.Also it should be noted that prior to the finishing work is necessary to plaster nepoliuretanovy layer, using a nylon mesh.

There are many other options of products for internal insulation of walls, however, we must first start from the above materials, as they most often used in the construction.

Tools and materials for thermal insulation

Despite the relative simplicity of the process of warming the walls, you need to have a lot of tools and materials.In this case, we consider the process of insulation of walls using polystyrene foam.Most often, the list consists of the following items:

• bucket;
• whisk intended for mixing mortar;
• catches for insulation;
• roller, spatulas;
• hammer drill with a drill (for concrete);
• tile adhesive;
• sandpaper;
• primer;
• antifungal additive;
• mesh reinforcement;
• sheets of insulation.

Depending on where it is carried out the process of warming, and may need some other tools and accessories.This is necessary in advance to learn from the experts.

process of internal insulation of walls in the bathroom

process of insulating walls consists of several stages.As for the bathroom, there is all the work should be carried out more than responsible.

1. The first step is to process the wall antifungal additive.This is necessary to not formed on the surface of fungus and mold.Speaking of the bathroom, then the risk of the fungus is very high, even if there is carried out regular cleaning and cleaning surfaces.Apply antifungal additive to the surface is very simple, just need to pour the liquid into the container, after which the roller arm.It should be borne in mind that applied to the surface too much antifungal additives is not necessary.The main thing - do not leave any gaps that the fungus had no chance of reproduction.We would like to note that often anti-fungal additives are toxic.Accordingly, the whole process should be done carefully.Moreover, there is the need to use breathing protection.Also do not forget about the regular airing of the room.
2. Next comes the most important moment.It is necessary to attach the insulation to the wall.This process begins with the angle which is closer to the window.Once we have put a heater, you need to arm themselves with a drill and a drill to make a hole through the material hitting the concrete wall.Holes need to do a minimum of 5: 4 of them are located on the edges of the insulation, and one - in the middle.
3. Now we need fungal clips.They can be attached to the wall material.This procedure is carried out on each unit of the material.
4. At this stage, we need to prepare a tile adhesive.Mixing takes place in a clean bucket using an electric drill and corolla.In this case, you need to follow the instructions given by the manufacturer.
5. prepared solution must be applied on the insulation surface with a grout trowel.After the end of this procedure must be attached to the wall reinforcing mesh.Thereafter, the solution need to stretch over the mesh.Accordingly, the net should be completely hidden under a layer of previously prepared mixture.
6. After the solution has dried, the surface to be treated with sandpaper.It should be understood that a large amount of dust is produced during this process.Accordingly, it will not prevent the respirator use, especially if the bathroom, in which the process has a large area.
7. After finishing the process of stripping the walls, you can start priming the walls.To do this we need to have a cushion, as well as the very first coat.As is the case with the process in the first paragraph, the procedure should be carried out responsibly.

This concludes the basic process of surface treatment, associated with the warming of the bathroom.Further it is possible to carry out all necessary work aimed at the finish.

If done really high quality, so the heater will differ excellent efficiency.Also, do not forget that it was thanks to a layer, created on the basis of tile adhesive and reinforcing mesh, insulation best suited for the bathroom, as moisture directly to FOAMED POLYSTYRENE has no access.

As for the other rooms, which are also often insulated home, everything is a little bit easier than in the case of the bathroom.It should be borne in mind that food material must be chosen which will not ignite.In the case of the living room and bedroom main requirements relate solely to environmental safety insulation.As we have said, often thermal insulation has high toxicity.Such questions should be pre-checked with vendors, or directly from the manufacturer of the material.