How plastering slopes of windows

Slopes for window openings originally set during construction.They can be made at a right angle, dawn (diverge at a certain angle), external and internal, and the geometry of windows - rectangular, arched or any other form of the contour of the window.The most difficult part of the plastering slopes of windows - correctly deduced corners.

correctly plastered window slopes create an overall picture of the front or the inside of the wall.It does not matter, you have installed plastic windows or wooden.plaster principle for all window openings alone.

Preparations for plaster slopes

1. works plastering slopes, should start after all made plastering walls and ceiling.
2. you in any case, you will need a set of tools.Level not exceeding the width of the window opening.
3. Two - three spatula made of stainless steel.Narrow about 5 cm, the average in the range of 10 -12 cm wide and 25 cm.
4. trowel (trowel) for capes solution, bevel, float, kirochka or hammer.
5. Screwdriver with a set of bits, screws, (if drywall finishing is assumed).
6. Reinforced fiberglass mesh.
7. aluminum or plastic corner.For the arched openings have a special perforated flexible area.
8. Dry mortar and plaster for finishing finishing.
9. Sill desirable to set in advance before the start of work on the slopes.Remove the knife for drywall, the remnants of foam along the perimeter of the window frame.

order of execution of works on plaster slopes

1. First trim the kirochka window opening, cut down all the tabs, remove dust and treat slopes primer.Let it dry and promazhte gipsokleem surface.Larger cavities can be repaired with plaster or alabaster.With alabaster work very quickly, because it hardens within 5 minutes.
2. Sometimes applying a very thick layer of plaster, reinforced with a metal grid attached.It prevents slipping or collapse of wet plaster, and after drying crack surface slopes.Ideal - reinforced with galvanized steel mesh.Strengthen its better anchors made of stainless steel.Rust has a nasty feature of the show through the plaster and putty.
3. throwing by trowel plaster produced in small portions with layer smoothing the surface.To create the desired angle of slope use poluter and grater.Deriving angles, consult the level.
4. most difficult part - the upper horizontal plane.Most often plastered surface with reinforced mesh.For ease of processing it is possible to sew up the drywall.
5. After complete drying of the plaster it is treated with antiseptics stseplivayuschey primer and prevents mold and mildew.
6. Along the perimeter of the window is glued slope reinforced with fiberglass mesh with a small overlap on the wall.For slopes with right angles, you can use a plastic profile area.If plastered angle less direct - you can adjust the size of the aluminum or galvanized corner.
7. surface puttied netolstym 2 - 3 mm layer of coarse fillers.After drying, the second layer is applied of very fine finishing putty.
8. dried out surface overwritten fine sandpaper or a special trowel trowel with interchangeable grid.Soil liquid for painting and painted with latex paint.
9. for color adjustment, there is a palette of water-soluble pigments of different colors.The paint is applied by brush or roller, preferably in several layers.
10. Finish outer slopes of windows does not differ from work indoors.The work should be carried out at a temperature no lower than + 5 ° C For more detailed instructions on how to decorate their own slopes there are windows on the video at the end.

trim and plaster the slopes in the arched window openings

1. Side slopes are performed in the traditional way.For
2. semicircular upper portion cut to size of the opening and the mold of plywood attached to the inner side wall.On the masonry surface mounted reinforced mesh and special poluterom plastered surface.
3. Another option is using the ceiling plasterboard.Angular increments of 15 - 20 cm are fixed mortgages.You can use the bar or U - shaped galvanized profile for drywall.The free space between them is filled with filler or render over.For this purpose we may use polystyrene foam, mineral wool or foam core.
4. By mortgages attached curved in an arc ceiling drywall.Next arch plane handled impregnation primers, puttied and painted as described above.
5. Sometimes, instead of the ceiling drywall using ordinary fiberboard.Fiberboard screwed smooth side up.The rough side is treated with primer and puttied.

dry method finishing of window openings

1. K treated and lined masonry surface of the window opening are fixed mortgages.They can be made of wooden slats or use a profile mounting rails for plasterboard.
2. for finishing window slopes is possible to use any decorative material.Plastic, drywall, wood panels and so on.The space between is filled with filler mortgages.
3. is possible for this purpose to use a heater.Mineral wool, foam plastic, foam or any other suitable filler.