Internal log processing: photo , examples

next step is to work on its interior decoration After the erection of a wooden house.The quality of their performance must be given special attention because of the quality of this work will depend on the comfort of human habitation, heat and sound insulation characteristics of the room, as well as aesthetic appeal of the house.

Features finishing wooden frame

Need for interior decoration due to the following reasons:

• as a result of finishing the house becomes more attractive;
• no finish considerably reduces the period of operation of the structure.In the presence of the primary insulation material from which the house is erected, it is considerably smaller than the load that the resulting structure facilitates preservation;
• finish improves the thermal insulation properties of the house, so the execution of these works will not only create a comfortable indoor temperature, but also will significantly save money on heating.

to finish log can not begin immediately on completion.It is necessary to wait a certain period of time - from 1 to 1.5, the shrinkage occurs while at home.Upon completion of this process, the building is ready for use indoors.However, among

finishes there a way to shorten the waiting and perform the appropriate operation after construction.This method consists in treating the polished log paint tools.This makes it possible to save time.Performing this manner of finishing expedient if the frame is warm enough and no need for additional insulation, and in the presence of smooth walls.

The advantages of this process are as follows:

• it is possible to start work immediately after the construction of the house;
• ease of operation;
• no significant costs.

Disadvantages:

• inability to hide the communication;
• complexity in the process of finishing an absolutely smooth surface of the walls;
• fragility of the coating.

This finish needs to be updated every 5 years.By this time it will be possible to use other materials as log shrinkage has finished completely.Consider all available materials with which to perform finishing.

Working with clapboard

This type of material is a board up to 220 mm thick, which are based on hardwood and pine wood.Mounting lining may be formed by the horizontal and vertical.To determine the most appropriate method should be based on building size:

1. For smaller homes will be the best one for vertical stacking.
2. If the building has a large options in this case it is better to stay on the horizontal mounting.This condition is due to the size of the material.lining a length of 2.5 m. When an improper method of laying the joints are formed.

It features trim clapboard log should also include the following factors:

1. Before work is recommended that treatment with special preparations lining protects the material against fire, as well as the negative impact of insects and moisture.
2. Wall paneling is recommended to strengthen the crate.Thus, to get the maximum stacking level, besides for obreshetochnym frame can hide communication.Availability lathing is not required in the case if the house is built from glued or shaped timber, such as the walls themselves are fairly smooth.
3. crates used for bars that have all the perimeter of the horizontal manner, respecting the distance of 50 cm.

begin interior decoration should log from the corner of the room.Through bonding "tongue and groove" styling will be made smoothly and does not require large expenditures of labor.There are three methods of fastening planks to obreshetochnym rails:

1. most qualitative method is considered by a special fixing clip, which is called klyaymer.One part of this product is fixed within the groove, when the second part of this need by means of the screw to connect with the rack.
2. also mounting is performed using galvanized nails.Under the appropriate slope of 45 ° nail is inserted into the "groove" and clogged.Last
3. third method involves the use of self-tapping screws.The board is necessary to make a hole, the diameter of which must comply with the cap screw and the depth should be equal to half of the board thickness.Then in this hole to be screwed into the screw and close the script.Then you need to align the font by grinding with the board.

Application lining has both advantages and disadvantages.This material is characterized by ease of installation, environmental safety, creates additional insulation and has a natural look.But it is quite expensive lining material and the board before the work should be treated with special drugs.

Finish log cabins.Photo:

finish rules using rope

This option can only be used for log home, built of logs.The present method of finishing is performed using the decorative jute rope and requires compliance with certain rules:

1. To begin the work should be only after the processing timber antiseptic.
2. rope placed in the structure of the crowns.This finish helps keep heat inside the building, and also prevents the entry into the structure of the wind and moisture.
3. rope fastened in several ways:

• by brackets;
• with glue;
• by special nails.

process occurs in the inner lining of a sequence of actions:

1. Before installing the rope should be treated with an antiseptic preparation.Next, you need to cut a fragment of a desired length.
2. edges should wrap the threads and processed by a varnish or glue in order to avoid dissolution.
3. For fixing, a special thermal adhesive, which is applied with the gun.Apply glue to the boards should be in the field of fastening rope.After
4. need to put on the adhesive rope.
5. parallel need to drive nails in his small size - 15 cm - 20 cm.
6. After the end of the rope and timber must be covered with varnish.

rope has such advantages as:

• acceptable cost;
• reliable protection log joints from penetration of cold;
• originality and decorative.

However, disadvantages of this material are the following factors:

• laborious installation process;
• inability to hide the communication;
• difficulty in warming other materials.

Features of the block house

Installation of this material is similar to the laying of lining and suggests the following sequence of actions:

1. Finish log in obreshetochny carried out on the frame.
2. begin work must be at the bottom and move upward.
3. last plank will need to cut back, at the top of the wall it will be less evident.
4. It should be noted that the block house fits very horizontal way.

The advantages of this material are such features as:

• credible imitation of this hut;
• ease of stacking;
• opportunity to insulate the walls and hide communication.

Disadvantages house unit may include:

• high cost;
• unnatural appearance due to improper installation.

finishing method using a putty

Despite the fact that this option is used in most cases for walls made of bricks, the method can be applied for finishing the buildings of the framework.In this case, the composition should be applied on a mineral plaster or acrylic.Caulking creates a coating that protects the frame from destructive agents.Also with special components composition can impart a desired color.

finishing process is simple: first, by means of screws you need to attach it to cut down a net, and it should be applied to the plaster.This method makes it possible to align the surface of the walls.

obvious advantages of putty are low cost, large selection of colors.The process of applying the composition does not require special skills and knowledge, work can easily cope amateur, moreover, in the shortest possible time.But this finish will last a relatively short time - about 5 years.Also it will not be able to completely hide the pipe, and finishing as a whole would not have expressed the aesthetic appearance.

Application drywall

This material as decoration for the log is rarely used, as in this case disappears the characteristic impression of the wooden house.But in some cases, this move is justified.cladding process has such features:

1. Plasterboard is mounted on a crate, made in the form of a U-shaped profile.
2. between log-plasterboard is recommended to lay the insulation, for example, glass.
3. material is then fixed to the profile by means of screws.
4. After installation works the joints need to putty, this will provide a flat surface.

As gypsum material advantages are the following factors:

• ability to perform as desired recesses and protrusions in the wall.This will allow to hide pipes and wires and realize any design solutions;
• as this material has a low cost and easy installation process.

Among the weak point of the relative fragility, becausethe material will last 15 to 20 years.In addition, the need for additional thermal insulation materials, instability to damage and eliminate the characteristic atmosphere inherent in homes of wood.

trim using plastic

This material is suitable for the finishing of the individual zones room log house, but not to its full lining.Plastic is mounted horizontal and vertical way.The most common last option:

1. At the initial stage of the work to assemble the frame.On it will be fixed panel products.
2. the top and bottom of the frame profiles must be attached.
3. Installation should start from the corner.The panel should first start in profile, after which the traction occurs.
4. panels are fixed to the profile by means of screws and nails.To improve the connection of plastic panels used liquid nails or glue.

advantage of plastics as a finishing material are such features:

• ease of installation;
• affordable cost;
• ability to hide communication;
• ample choice of color Gama.

But this plastic material has disadvantages:

• highly flammable;
• insufficient resistance to mechanical stress.

Conclusion

Interior decoration is essential for the subsequent operation of the framework.In the first place with the help of finishing materials can solve the aesthetic problem and arrange the house according to your preferences.In addition, the finishing has practical value for the log.It will create an additional warming layer and will help maintain a comfortable temperature in the room.

Interior decoration log.Video: