How to close the pipe in the bathroom

During overhaul the question inevitably arises: "How to hide the pipe in the bathroom?".The urgency of this problem is due to aesthetic requirements.Nespryatannye pipe significantly spoil the interior and give the room a bathroom unattractive.Today, there are many ways by which you can hide the water communications.To make the right choice amongst such a variety of options you need to rely on yardage and bathroom interior, as well as on the financial capabilities and personal preferences.

Requirements for installation work

The progress of disguise necessary to observe certain rules:

1. The first step is to provide free access to communications.Otherwise, in the event of an emergency, it is necessary to violate the integrity of the building is to eliminate leakage.
2. is also not recommended to lay the pipe with a large number of compounds.Such designs will make the process of distributing and placing equipment more difficult.
3. connections must be made of the same material as the pipe.
4. During the installation process should be provided access options for urgent repairs.In this regard, the placements taps and valves necessary to make small hatches.To
5. on communications not formed condensate is necessary to use materials for insulation.

Masking pipes in the wall

Thinking about how to sew up the pipe in the bathroom should consider the option of masking the wall.Typically, this type of work is performed in the initial stage of finishing room, becauseproshtrobit wall it will be much more problematic when cosmetic repairs.

communications masking process is carried out in the following sequence of actions:

1. first step is to make a layout, according to which the procedure will be hiding.
2. Next, focusing on data schematic clues needed to be done in the wall Stroebe.These are small grooves which size should match the diameter of the pipe.
3. In connection with the possible expansion of the pipes with hot water and heating should be carried out so as to provide easy access to data communications.
4. then placed in a tube Stroebe prepared and fixed by means of fixing elements.
5. This main part of the work is finished.Now we can proceed to finish the walls in places pipe placement.

to pre-empt the emergence of possible gusts or leaks in the bathroom is recommended to opt for polypropylene pipes or other products that do not have threaded connections.The advantage of this embodiment is the ease implementation.But at the same time, this method has its drawbacks.The most important of these include the appearance of a significant amount of waste.Also in case of leakage will have to shoot from the wall lining material, to detect and correct the problem.

use furniture

This option is the most simple of all the possible ways that allow you to purchase the hidden pipe in the bathroom.In this it differs quite effective.Water posted for embedded communication furniture.It is worth considering some of the features of this method of masking:

1. To implement this option furniture must be treated with antiseptic and anti-fungal compounds.
2. During the workflow necessary to comply with the maximum precision docking sizes and provide a solid fixation of furniture elements.For example, the unit as desired, the necessary parameters can be used in a vertical arrangement of communications pipeline.In this case, removed the rear wall and on the panels at the top and bottom of the corresponding cuts are made.This cabinet will bring a double benefit.In addition to the direct purpose it can be used to store different things.
3. Choosing furniture must be sure that it will retain its performance for longer stays in a room with high humidity levels.To make furniture moisture resistant properties, you can use a special protective material, but this would entail additional costs.There is such material is not cheap.

How to close the pipe in the bathroom by redevelopment

The main advantage of this method is the aesthetics.However, the whole process will inevitably entail some complexity:

1. Remodelling involves additional financial expenditure.
2. In addition, this process is quite time-consuming, t. To. For its implementation will require a lot of effort and time.
3. Another negative aspect is the reduction of space.As a rule, the bathrooms are already not differ by more footage, and then work on the redevelopment footage of the premises will be even less.

But at the same time planning the change will provide a special niche, which in addition to masking the pipes can also be used to accommodate the washing machine or sink.Close communication in such recess by using a special screen or liner.Also with this embodiment hide pipes will be provided with easy access to them.

How to close the pipe in the bathroom.Photo:

How to sew up the pipe in the bathroom floor

This method of masking allows you to hide the pipe most aesthetic way, as well as to save scarce space in the bathroom.However, it has certain drawbacks, the elimination of which requires additional labor costs.The main aspects should include the following:

1. In the event of an emergency when placing pipes in the floor will be flooded lower apartment.To avoid such consequences, grooves, which are placed in the pipe, you need to additionally protect from moisture.This can be done using mastic or soil composition.These measures will help to avoid or minimize the unpleasant consequences in the event of a rush.
2. also need to take care of the sound insulation.Placed on the floor of the pipe will create some noise for the neighbors.It should be remembered that for the location of the sound-insulating material of the groove will need to increase in size, and it will lead to a weakening of the structure.
3. If laid in mortar communication can be significantly reduced shtroblenie.In those places where the pipe will be the load (for example, a bath or washing machine), communication can be deformed.To prevent this during the operation is necessary to use the valve.

How to hide the pipe in the bathroom with the help of duct

Box - the most practical way communications disguise, which will provide easy access to the pipes along with high aesthetic design.It can be made of a different material.For this purpose, use wall paneling, particleboard, plywood.However, the most popular drywall.It contributes to the popularity of a number of advantages that has this material:

• ease of installation;
• availability;
• variability of clearance;
• practicality;
• durability;
• ease of repair.

As part of the gypsum board, there are no toxic or radioactive components, so that the material is not harmful to health.If necessary, dismantle gypsum material cost significantly cheaper than removal, such as tile or stone tiles.

So, to build a box with their hands should be prepared as follows:

• gypsum material;
• metal profiles or wooden bars;
• knife for cutting drywall;
• screws and dowels;
• hammer;
• drill;
• screwdriver;
• level;
• plummet;
• roulette;
• tape for depreciation;
• foam;
• putty.

If you have a metal laid communication, then before installing the boxes they need to be a certain way process, as after the completion of access to communications will be closed.For this purpose, the surface of the pipe is necessary to remove the old paint and apply a new one.This will prevent the formation of rust.Note that the boxes be assembled only after the paint dries.When using plastic pipes such training does not need to spend.

Also, before you start to work, you need to perform measurements.It should be remembered that the pipe and gypsum board should be separated a distance not less than 10 cm. At this stage, is determined and the required number of profiles.

There are two options box installation: with two and three walls.Let us consider each of them.

order to form two walls need to prepare two sheets of drywall and three units of the profile.Work should begin with the installation of the side profiles:

1. Initially, you must determine the height of the wall and, guided by the result, fragments cut profile.
2. Next using a drill in the wall caves in which the means of self-tapping screws or dowels made fixing profiles.
3. In the next step you can install the first wall.Pre-need to adjust the size of the sheet.The work is performed as follows:

• material is laid on the floor, where with the help of a ruler determined its size;
• in the presence of protruding edges should get rid of them with a knife for drywall;
• material should be cut from the paper, then the sheet is easily broken;
• to form an edge to the wall need to attach the third profile.

1. then set the second wall.It should be placed so as to cover the first structure in contact with the edge.
2. second sheet is fixed by screws.This installation work is finished, now we need to make duct aesthetic appearance.To this end, the edge of an abrasive polished float.As decoration for plasterboard boxes are well suited tiles.

design with three walls mounted in the following order:

1. This wall mounted two profiles.
2. Next plasterboard material cut two pieces of identical size, which is set in the profiles and are fixed by screws.
3. Then profiles are attached to the ceiling and the floor.They are inserted into the rack, which will serve as the ribs.
4. These racks are fixed to the side walls and the guide profiles.
5. Next you need to measure and set the third wall.This design is ready.

Masking using

Today screen in specialized points of sale, you can find a screen that is specifically designed to hide the pipes.The construction is a frame with two guides.To her mount made of drywall or plastic panels.

Due to its low cost of the screen is quite affordable for a wide range of consumers.He has good aesthetic properties, is easy to install and, if necessary, can be removed without much effort.During installation this screen will involve a certain amount of useful space, but it still does not have a significant impact on the footage of the room.

screen can be done by hand.This will require 4 bar, angles and screws.The process of construction is as follows:

1. The bar, by which the structure will be fixed to the wall, you need to make two holes.
2. then frame at a party attached to the base of the wall.
3. fastening elements should be selected according to the material from which the wall is made (brick, block, concrete).
4. to manufacture drywall panels fit with a water-resistant characteristics.
5. smaller panel should have similar dimensions to the frame.A large panel must exceed the frame by 56 mm.
6. should be used for building the knife cutting the panel members.In the manufacture of the panel directly to the bath in the drain pipes need to make a hole, which subsequently is fastened via the door hinges.
7. If the panel is made to disguise the vertical communication hole runs freely anywhere.
8. then two panel parts are connected by screws.
9. This screen is ready.On request, it can be decorated using mosaic or tile.You can also make the screen ventilated, drilled holes in it.

Conclusion

a need to hide plumbing Communications When performing repairs in the bathroom.Since the closed pipe in the bathroom dramatically transform the interior and make the room look more attractive, there are several ways to solve the problem.To select the correct version should take into account the stylistic direction, which is decorated bathroom and footage of the room.Also, the cost of materials used in a particular process.

How to hide the pipe in the bathroom.Videos laying tiles on the box: