Obuvnitsa own hands

Obuvnitsa , it - a shelf for storing shoes, it should be in every home, otherwise the hallway chaos reigns sheer .Putting shoes on a special shelf or in a drawer, you keep the house clean and in order, protect shoes from the encroachments of pets.In the furniture stores have a wide range of such structures, however not always possible to find a suitable variation nt to I interior or production cost prohibitive.In this article we will look at several ways to create a stylish and functional obuvnitsy own hands.

to design

Requirements The most important requirementa shelf for shoes - the ability to accommodate daily shoes for each family member.That is, bachelor suit modest small locker, but for a family of 3 - 4 people sizes obuvnitsy must be appropriate.The main problem in the model shop that most of them were made in China, which is known to have a weakness for anything miniature and compact.In this

compact case it is not synonymous with ergonomics, so you have to pick up a hammer, the board and learn how to make obuvnitsu own hands.

Another drawback of almost all offered shops shoe cabinets - a complete lack of ventilation.Imagine this situation - you come back home on a rainy autumn evening on Friday, took off his shoes, put wet shoes on the shelf and set out to spend the weekend at home.By Monday, when you again have to go to work, wet leather shoes acquire very poor condition.Ventilation is essential to maintain a shoe in proper condition and prolong its operation.

So, what qualities must have an ideal obuvnitsa :

1. Ergonomics - shoe cabinet should not take half of the hall.
2. Functionality - here comes the concept of spaciousness and other uses.For example, in the locker, you can sit down (the role of the stool), to put things (part tables), and obuvnitsa the mirror will become a mirror.
3. Have good ventilation - we are not alluding to the fact that the inside of the cabinet should be installed fans and conduct pipes, just enough to provide fresh air by natural .
4. Aesthetics - look and design obuvnitsy should be in harmony with the interior.

All below obuvnits scheme fully comply with these requirements.

Obuvnitsa-dryer

This shelf for shoes lovers of simple and practical solutions.The basis of the classical suspension drainer was taken.Why not?The design is not on the floor, means underneath can easily clean up.Shelves not solid, but as grids, stainless steel, means through the bars of a metal obuvnitsy will safely drain water or melted snow, they can be quickly washed, wiped with a cloth.This furniture looks quite original and minimalistic - no extra bulky door, legs and decorative elements.This option is perfectly suited for apartments in high-tech style and a loft.

Tip: If you live in the house pets, better still do light door to keep the shoes.To do this, use a glass or plastic.

best part in the work of their own hands that you can specify any size.For example, in the preparation of the drawing obuvnitsy consider what shoes do you use most often.For example, if the house lives fisherman with size 45 feet, which is a day enjoying high rubber boots, and the shelves dimensions must be appropriate.The upper part of a "drier" you can take for slippers or easy shoes.It is not necessary to put the dirty or wet shoes, so as not to hurt the floor below shoes.

for producing such a cabinet is not necessary to buy a sheet of chipboard - quite conventional furniture boards.They can be found in any supermarket construction, with panels already fully ready to build - they plastered edge and sawed into equal parts.We specifically do not we write the exact height and width obuvnitsy , that you create a personalized drawing for your home.

second of than need to take care of - the metal mesh.They are also sold in DIY stores.The standard width of mesh is 46.4 cm, 56.4 cm, 76.4 cm and 86.4 cm, but can be ordered and non-standard (it cost a bit more expensive).If you you Biran shelves maximum width of 86.4 cm, the outside dimensions of the cabinet 4 shelves will be as follows ( HxWxD ):. 120x 90 34 cm depth of 34 cm is quite enough to fit boots to 45size.

important point: To improve functionality and compact shelves, place them at an angle into the cabinet.So water will flow in a given direction, and cabinet takes up minimal space.

What details need to build obuvnitsy :

• sidewall 118, 4 32 cm - 2 pcs (standard for the manufacture of wood panels, cabinets coupe);
• facades 119, 5x 44,7 cm - 2 pcs (you can buy direct from the panels of chipboard or MDF shaped facades);
• upper cabinet cover 90 32 cm - 1 piece ;
• tsargi 86, 8x 10 cm - 2 pcs (also sold in furniture stores);
• rear wall 119, 5x 89,5 cm - 1 piece ( it is better to make out the thin and cheap hardboard ).

're just buy the necessary fasteners and assemble a wardrobe for shoes.You do not even have to saw nothing - all finished parts are already on sale!

components and fasteners required for obuvnitsy-dryer :

• konfirmat 5x 70 mm - 8 pcs ;
• corner furniture metal - 8 piece ;
• screws 4 16;
• furniture loop 4 hinge - 4 pcs ;
• dowels and front handles - on its discretion.

For work you need the usual tools that exist in the building each owner - drill, screwdriver , hammer.

How to build obuvnitsu :

1. With SCREW tighten tsargi to bokovinki future obuvnitsy .The sidewalls under SCREW drill-holes 8 mm in diameter, in the end parts of the drawer side also make a hole with a diameter of 5 mm and a depth of 55 - 60 mm.Drill so that holes clearly coincided.
2. half the number of parts of the screw to the top of the roof and the remaining 4 use instead of wall fasteners, of adapting them to the back of the sidewalls.
3. Screw the screws all the details.Before fixing hardboard check the evenness of the box geometry - its diagonals must be equal.
4. Measure the vertical sides of the facades of 15 cm at the top and bottom and 2.2 cm deep.The target point make holes for furniture hinges with a diameter of 3.5 cm.
5. Install door and screw the knob.
6. Hang locker at a height of 12 - 15 cm from the floor, to underneath could clean up.The distance between the bottom and the second shelf should be at least 35 cm in order to fit boots.

Tip: In rainy or snowy weather put under obuvnitsu pan to prevent water from flowing onto the floor.

Compact obuvnitsa

In this chapter, we describe step by step process of creating a very original, miniature and elementary obuvnitsy .She suitable for any interior design, and even children can be involved in decorating process.Shoes on a shelf looks very neat, but to create a pile of it is simply impossible.

With the creation of such a narrow obuvnitsy handle even those who have never held in the hands of carpentry tools.You can not even ask a neighbor hacksaw - just make a drawing with the right sizes and ask to saw boards in the same stroymagazine , where they were bought!The only thing without which you can not do in the assembly - a drill.

To build a compact shoe shelves, you will need these tools and materials (we provide the dimensions for the design, which suitable bachelor or young couple):

• the simplest long shoe brush with hard bristles size 160 x 40 mm - 3 - 5 piece (depending on the length of future obuvnitsy );
• water-resistant plywood 12 mm thick: 1020h 370 mm - 1 pc ( A ); 1020h 90 mm - 1 pc ( In ); 1020h 130 mm - 1 pc ( With ) ; 90 118 mm - 1 pc (D); 1020h 60 mm - 1 pc (E);
• studs 6 mm - 6 pcs ;
• screws for wood;
• adhesive for wood construction;
• acrylic paint;
• moisture resistant clear lacquer;
• brush;
• dowels.

paint the shelf can not only acrylic paints, suit even the usual gouache , if it then immediately open transparent varnish.If you want to do without the varnish, use enamel.And if you like beautiful wood texture, you can simply cover obuvnitsu transparent varnish, lightly smoked stain.

How do obuvnitsu :

1. assembly should begin with an element containing brush .Drill in the plywood edge In 6 through holes.
   
2. obtained in six holes, insert the spikes, smeared with glue.
   
3. The plywood With do exactly the same holes promazhte its glue and connect with plywood V. Better all these elements will compress clamps to complete solidification of the adhesive, or simply set themany load.
   
4. Similarly, the resulting paste to design the sides of the element D. Each promazyvaniya glue greatly compress the glued parts.
   
5. hacksaw on wood saw off at brush handle, if any (better to buy the cheapest brushes without handles).
   
6. Each brush drill 2 through holes and screw them into 1 cm from the edge of the design with short screws so that hats were on the inside of the brush .
   
7. Make drill-holes in unused parts of the elements A and E, as shown in the image below.
   
8. Using screws to connect all parts of the shelves until the end.
   
9. Color obuvnitsu in the desired color or razrisuy different colors.In this case it turned out monotonous bright green design, but you can ask for younger family members to participate in the process or independently to paint plywood.If the ability to fine art is not, you can make decoupage or collect mosaic .
10. remains only to drill holes in the wall under the dowels and hang obuvnitsu .
    

Obuvnitsa of PVC pipe

Finally, we have prepared for you the most unusual and fascinating master class on creating (not afraid of this word) creative obuvnitsy the hallway.With this structure, you can always maintain a clean and tidy house, and even the kids will be happy to put their shoes "in house".

From what made this wonderful shoe rack?You'd be surprised, but this is the most common of PVC sewer pipes, which are available in any modern city apartment.They cost much less than high-quality wood or water-resistant plywood, with different almost eternal service life and ease of installation.

For one such obuvnitsy you need one pipe for sewer 300 mm in diameter.The standard length of the article is 3 m .To make a roomy and deep enough compartment for adult shoes will be enough 30 cm. means of one pipe will as much as 10 shelves.

Cut the PVC pipe in the cellar.To do this, you can use a regular hacksaw with a fine tooth.Mark the surface of the marker, and divide into 10 equal parts.Every piece of pipe one hand treat sandpaper to smooth the sharp edges.The other end will be adjacent to the wall, so it is not necessary to grind .

Since these circular columns are very strongly reminiscent penechki or a log , we decided to arrange them accordingly - making imitation birch bark.Of course, it could draw, but it is much easier and faster pipes wallpaper paste over with a suitable pattern.You can make obuvnitsu somehow.For a monophonic "gray" fit shelves hallway bright saturated colors, for a modest squaring slightly better shade obuvnitsu , having painted her in black or dark brown color.Before painting, it is desirable to degrease PVC, acrylic or gouache to lay evenly.

It only remains to glue all the pieces of epoxy glue.First glue horizontal segment 4, putting them on a flat surface.For a more robust fixing press them together clothespins or clips, which can be removed after curing the adhesive.

On 4 pipe glue 3 following blank, and then the other, like a pyramid.In fact, the sequence of bonding and the number of tubes in the ranks may change at your discretion.Epoxy adhesive is very strong, and if they stick properly tube, it will not fall off, even at an angle or by weight.So this is an excellent opportunity to dream up.

An alternative way of creating a shelf for shoes with his hands out of PVC pipes in video format:

Obuvnitsa : photo

options obuvnits very much, but if you do not know, from what push off, go to the nearest furniture store and pick up the basis for one of the proposed models.The usual "boring" bookshelf, you can turn into a functional obuvnitsu with seat, mirror, coat rack or additional drawers for brushes and creams.But before going to the shops invite you to be inspired by the following photo galleries :