Many builders believe the wood the best material.And this definitely makes sense, as the base of the tree, you can easily create any design composition.Wood materials can transform even the most ordinary-looking room, and it must be remembered.

the most important thing for people who want to decorate the tree all the room is the fact that the wood never goes out of fashion.The design, created in the early 20th century, based on a natural material, looks great, and in our days.Such examples are many, and over time, wood trim and furniture are becoming more attractive in appearance.

Also do not forget that wood can be processed again, that allows you to update the home regularly, adding some modern shapes.Well then, in this aspect, there are no restrictions, both in terms of design decisions, and from the practical use of the tree.

course in wood a lot of positive qualities, but in this article we will examine in detail the main features related to the finished kitchen tree.Also we analyze the main problems of this process.Do not leave aside the issue of acquisition quality wood furniture that make the kitchen a cozy and warm place in the house.

main features wooden kitchen

As already mentioned, the timber creates comfort in virtually any room.However, when it comes to the kitchen, here there is no doubt a positive result.The good news is that the kitchen allows you to implement a variety of solutions related to the finishing of the walls of wood, as well as installation of furniture.

important to know that from the cozy kitchen facilities are very easy to make a tasteless room.One need only to make a mistake with the choice of wood to the kitchen looked ridiculous.It should be understood, therefore, often make design professionals who are well aware that what goes and what subject will look good in a particular space.

Accordingly, it makes sense to find on the Internet is already finished design solution, and on this basis to equip the kitchen.We know what kind of results we get in the end.Also, it would be easy to deal with the materials that will be needed in the process.

Wood materials for the manufacture of kitchen units

First of all, you need to know that the need to use solid wood there.It's too expensive.You also can not rule out the difficulties in the processing of wood, as each tree has its own structure.

For small shelves or cabinets, you can use MDF.The thickness of such panels is 16 mm.This wood material is dense enough, so you can be sure of high reliability produced by the room elements.Also on offer can be found MDF with different variants of color.This makes it possible to diversify the appearance of the kitchen.

If we need to create partitions for drawers and cabinets, thin panels on the basis of MDF can be used.The thickness of such material is often limited to 5 mm.

to create high-quality and durable countertops are best used solid wood, thickness should be about 30 mm.In this scenario, you can be sure that the countertop will last more than one year.Also, the wood can be re-processed by updating its look.

Do not forget that the solid wood should be pre-treated with antiseptics.

worktop wood

Obviously, the table - this is the most important component of any kitchen.Now we will try to consider the process of creating wood countertops in detail, as well as to take into account the main difficulties that may be encountered.

In the beginning, you need to determine the dimensions of the future countertops.In this case, it all depends on the size of the kitchen.If the room is small, and should make a small countertop in size.You also need to take into account the fact that the worktop should be convenient to carry out daily activities.

worth a responsible approach to the choice of wood.It should be borne in mind that it affects the durability of the future countertops.Often the choice is made in favor of the following tree species:

• cherry;
• oak;
• walnut;
• cherries.

also often specialists create countertops based on exotic species of trees.However, it should be borne in mind that these solutions are too expensive, so it is best limited to the above-mentioned species of wood.If necessary, cover the tree beauty or special varnish, thereby making the surface of the countertop looks original and attractive.In this case we are talking about quite modest financial expenditure.

In the process, we will need these tools and materials:

• wood;
• paint / varnish;
• glue joiner;
• antiseptic;
• sandpaper;
• milling tool;
• jointer;
• clamp.

Do not forget that the board needed to countertops, should have the same thickness, or in the course of operation, you may encounter a variety of problems.

Next you need to decide on the method of connection boards.It should be borne in mind that this is a very important aspect, which includes a lot of subtleties.

• connection method "edge to edge".This is the simplest method of attachment, and at the same time, the most unreliable.In this case, the adhesive is used, so during the period of operation of the board can be pasted also can not exclude the occurrence of cracks, material differences arrangement levels.
• method "edge-notch."There are also simple, but, unlike the previous method, more reliably.Accordingly, the groove is created, which allows high-quality secure the future of the desktop.Interestingly, the grooves, often, makes a small (up to 15 mm).The indentations in the wood are created by milling, which provides excellent quality produced by grooves.You can also buy ready-made metal grooves and set them in the right places.

After fastening wood surface to be processed.To do this, use a varnish, which will give the wood a nice shade, and will also protect the natural material from external events.Apply paint to the surface it is best with a brush.When using dark nail polish will be immediately visible places that were missed in the processing of the material.Also, the wood can be coated with a layer of paint, but a positive result is obtained in this case is rare.

Do not forget about the additional activities related to the establishment of the tabletop.It is about creating a protective edge of the table.This is a mandatory measure, which will make the tabletop more attractive, as well as to protect against accidental damage major surface.For this we need 4 bar hardwood.Of course, it is best to use birch or beech, but oak is not very suitable for this situation, because it is too heavy.The height of the bars must comply with the height of the wood surface countertops, but the thickness can vary between 5 mm and up to one and a half centimeters.Along the edges of countertops create a one-sided comb.This can be done using a manual cutter.Accordingly, we get a kind of groove that is mounted to the table top.Protective edge greased with glue (PVA can be used), and is firmly pressed against the main part of the table.You can use additional fixing tools.After the glue is completely dry, you can use sandpaper to accurately process the timber.

Production of kitchen chairs

Unlike many other kitchen utensils, chairs can be relatively easy to make your own hands.Moreover, we should not think that in the end we get too easy chair.With simple and easy steps, you can transform the kitchen element, resorting only to a minimal financial costs.

In this process, not to be redundant, the following materials and tools:

• wood blocks;
• plywood (preferably large thickness);
• building pencil;
• line, angle;
• Saw;
• grinder (or a set of sandpaper);
• drill;
• screws;
• brush;
• varnish.

All of the above tools and materials can be hassle-free to buy or borrow.However, it should be noted that instead of the saw can be used jigsaw, preferably electric (this will significantly speed up the process).

Accordingly, the bars, we need to create the legs of chairs, as well as the horizontal fastener designs.As for the plywood, it will be used to create a seat.Thus, it is important to keep in mind that the plywood should be thick and smooth.

Before the start of the process will not interfere to create a full drawing of the future chair.In this case, you must mark all sizes, and from which you can draw on.Enough to portray the views of the top and side chair.

Next comes the basic process of creating a chair:

1. First you need to take the sticks and check their status.Of course, in the wood should not have any flaws, as well as curvature and convex.All marks in size makes a pencil.With the help of a saw cut the extra part of the bars, while paying attention to the geometric accuracy.To do this, you can use miter box, which does not allow cut off crooked timber.Likewise, we saw off all four legs of the chair future.
2. Also, we need the so-called partitions, which are located between the legs.This is the most important part of the design, which ensures its integrity.In this case, it is imperative to meet all the planned size, or assemble a chair and did not succeed.
3. Next, based on the plywood (or large sheet of wood) cut out the seat.Here again, we should seriously consider the size, as any deviation will be immediately evident.
4. now need to arm themselves with sandpaper and carefully sanded feet, partitions and seat.It is with the help of emery can be minimized all the flaws that may be in wood.It is also possible to use a grinding machine which more efficiently process the wood.
5. At the end of the build of the chair.You can use the self-tapping screws with plugs.Also, quite often there are special grooves that allow to connect all parts of the future chair.Thus it is necessary to use a PVA glue, which provides the bond strength for many years.

Cladding kitchen walls with wood paneling

If we want to make the kitchen is fully wood, and should take care of the decoration of the walls.Accordingly, it is possible to use wood MDF panels that occur in homes with more and more every year.And this is not surprising, as these panels have a huge number of advantages that are not available in other finishes.The first material may be noted the versatility, since it can be used in almost any environment.In addition, for the installation of MDF panels do not need to pre-align putty or surface.

course, MDF panels are manufactured based on fiberboard, so those who wish to decorate the walls of solid wood, should pay attention to other options.

kitchen Decorating the walls of MDF panels includes the following stages:

1. creates a frame on which are mounted panels.It can be a wooden crate or frame made of metal profiles.The second option is more durable, but it is come, and the wood base.
2. installation panels starting from the corner.Mounting the first panel to the crest occurs right on the basis of screws.All subsequent panels are fastened by means of slots.It is necessary to ensure that all components of the skin tightly connected to each other.
3. At the end should be installed around the casing corners, which will be a kind of boundary for the panels.Also, the material can be treated with a varnish to protect it from the effects of moisture, grease or dirt.In this scenario, the panel will last a very long time, and they can be easily replaced with new ones if necessary.