Frame house with their hands

If you decide to draft a frame house with his own hands, it is necessary to take into account that the frame house can not be too spacious - 4-5 meters along the length of one wall - is the best option and can not be roundedangles.

Schemeframe house

foundation frame house

Before assembly of a frame house with their hands need to lay the foundation.melkozaglublenny belt is quite suitable for light construction, cheap columnar or suitable for any type of soil foundation screw.

helical pile is the best option for light homes due to the high maintainability and possible venting of wooden structures.It is necessary to provide for the presence of cut-off of waterproofing on top: the best option - it is a 2-layer roofing.

Bottom rail laid on the waterproofing to the anchor bolt.Boards laid one after another on the sides of the foundation with a minimum number of joints, as in video.

Construction frame

frame can be mounted wooden or metal.The metal will be more expensive, but steel fasteners can be used for its fastening.

Wooden have before starting to process an antiseptic and for its fastening wooden pins have to do.The frame can be assembled separately from the foundation.

How to frame houses with their own hands?Assembling of the carcass begins angles how video.To create the angle you need to attach two boards that have tightly spliced.Secondly installed boards that mark the beginning of the window and door openings.

distance between the remaining racks will fit better if the width of the heat-insulating material - panels or rolls.Too often, too, put the rack is not necessary.They are cold bridges.Vertical beams need to strengthen the braces.

After installing the bracing and leveling stands on a level you can start laying the crown of the ceiling of the first floor.

next stage formed door and window openings.The vertical side plates are already formed, so you need to install only the horizontal base and the top of the sill of the window / door.Boards are fastened with screws, the bottom board additionally fixed.

Crate

crate can make a horizontal or oblique.Horizontal considered weaker and starts every 20 cm of emptiness.

Bias starts at 45 degrees and every 25 cm of emptiness and fastened with screws.After installing temporary batten jib can be removed.

Covering

Beams for the floor should be calculated in such a way as to minimize slack in the structure.The beams are placed along each other and screwed studs.The distance between adjacent joists should not exceed 50-60 cm.

to the first floor floor slabs need to install additional backup.For floors on the second floor so backups will be the interior walls.As you can see, the installation of a frame house with his own hands is quite feasible.

Roof

If built last slab floors, the lag ends need as supports for the roof trusses.The roof can cover Onduline, metal tile, soft roof.roof frame starts to be placed at the corners.

ends are fastened to the joists, and the top is set mostly triangle.The distance between the rafters should be between 60 and 100 cm. The work on the assembly of a frame house with his own hands is best done on the ground.

Sheathing

Before finishing the house siding is necessary to wrap up the walls and roof of a vapor-permeable membrane in the overlap of 20-30 cm.

After the walls covered with siding, roof roof, and the windows are insertedin window openings can finish the work with the floor.Bottom lag stitched board, which will be laid insulation.Bottom fit foam, which is spread mineral wool.Next is a floor grid boards perpendicular to the joists sexually.On the floor sewn plywood or OSB panels.

now remains to insulate the walls of the foam and mineral wool, fix the vapor barrier on the inside and execute interior decoration.For more thorough home will give stability installation of internal struts.

For clarity, we recommend to see step by step photos and videos on this page, which will help to understand how to build a brick house with his own hands.

Video construction of a frame house with his own hands

frame house 6 6