Plastered brick wall with his hands

If you have a brick wall, then it will certainly need to plaster, if you certainly do not want to arrange a room in a loft style.This may be a new house with a rough finish or no finish or old house, which in the process of overhaul all the layers of plaster were scraping the walls - the difference is not important.Plastered brick wall with their hands will prepare the room for final finishing.

Step by Step

Before starting work it is necessary to prepare the wall and solution.With the new wall kicking nodules excessive masonry mortar, with the old dust cleared, the old layers of plaster and finishing.

Ideal - an opportunity to deepen the masonry joints up to 1 cm to improve adhesion with plaster solution.If the brick is smooth, it is necessary to make notch a chisel, grungy brick and do not need to touch the relief.The entire surface is primed and dedusted.

adjacent surfaces of plastic (slopes on the windows), cover doorways need to close the masking tape to avoid staining.Plaster Interior brick walls quite dirty event, so the room you need to make all the pieces of furniture.

next step proceed to the installation of special places in the slopes, and beacons.

Beacons - metal corners easier to fix on the wall with plaster.

verticality beacons checked the slope and the wall surface to obtain a flat, you need to adjust their distance from the wall by pressing.

Instead, you can use a plumb level, if it is suitable in length.

distance between the beacons should be such that your rule is easy to slide on them both runners.Now it's time to prepare the solution.

dry mixture is diluted according to the instructions.If it is a plaster brick walls cement-sand mortar, the proportion of cement to sand is 1 to 2 or 3. The solution is mixed using a drill with a special nozzle-mixer.The solution needed to mix in such quantities as to have time to work out before it thickens.Before the start of the wall works should be wetted with water to reduce moisture absorption.

first to align the walls pounces plastering trowel and roughly aligned.Lower plaster consistency should be a little more liquid, creamy.The layer should be 5.4 mm thick.The main thing you need to make sure that the solution advocated beacons edge.

According to the technology, the next layer is applied over carefully after the complete drying of the first.

total layer thickness should not exceed 10 mm.The plaster is applied with a trowel and it should be more viscous.Gradually filled the area between the adjacent beacons and leveled rule.

empty shell filled with a solution once again, the excess removed.When plastered the entire wall, it is necessary once again to walk the rule.Before filling each subsequent plot to be cleared instruments.

After the plaster was delayed - and this happens after 5-6 hours it is possible to start to smooth away trowel until the surface is smooth.

At the end of the joints accurately formed with a window and a door.

If insufficiently worked an angle with the ceiling or wall corners, you can use to align angled spatula.

Self plaster walls of bricks is over, now you can start decorating.Photos and videos that you can see in this article will help you make the work quickly and correctly.

Video plaster brick wall