Do tinting paint with their hands - and technology advice

When repair is often raises the question of selection of desired color (shade) of paint for a particular surface.Despite the fact that stores are now many different paints, desired not always possible to pick up.As it does not always have time and opportunity.So often we have to deal with on their own kolevkoy paint and prepare the desired shade with their hands, from the available colors.

This (Manual) mode mixing has pluses and minuses.The advantages include the fact that the preparation can be done directly on the site and get what you want.And on the computer do not have to spend TINTING.However, a disadvantage of this method is that it is necessary to correctly calculate the required amount of ink prepares.If it is not enough, repeat the "one to one" will not succeed.

Take into account that before mixing of paints necessary to pay attention to their composition.In particular, the presence of pigment and binder component.This is a fairly complex issue and should understand in more detail, if you want an exact "fit" in different shades.

More often necessary additives and mixed with paint purchased for manual tinting in the store.When any one of tinting colors taken as basic, and on this basis is preparing the necessary shade.Most often taken as the basis for such paints is white, although you can use any color.It substance (the additive) is added, known as "pigment".It gives the starting material and the desired hue.

cooking technology

most often in a container (usually in a bucket) pour white paint.Then, depending on the desired result, is added tinting paste.Add it to be parts, stirring all the time.Periodically, the resulting mass "tested" on any surface (a sheet of plywood, for example).However, to judge the quality of the resulting color, you need to wait for drying test "smear".After all, fresh paint always seems a little lighter.

It is believed that the paint plant pigment can be directly based on the instructions that came with the coloring composition.It identifies all the necessary proportions.Sometimes two or more pigments are used.But in this case the result can not be predicted, especially - repeat.

It is best to first practice on small quantities of material.At least you can see what to expect and it becomes clear that to correct.