How to equip the attic in the country : choose the right approach to the finish

The choice of building materials for finishing the attic with his own hands

Consideration of building materials must be of high quality and rational.It is necessary to adhere to the views of non-standard room - its special location, and mindful of the walls and slopes, are often part of the roof slopes.

necessary to guide the choice of materials essential requirements:

1. Waterproofing
2. High strength
3. Resistance to temperature changes
4. Reliability

preparatory stage before the finish will be the completion of a process that involves the use of the liquid-based.After that you should engage in laying sound and thermal insulation layer.

Bring the attic in the country in the form of ready-made possible thanks to various materials.Consider:

• Plasterboard sheets;

• gypsum sheets;

• Plywood;

• Wooden wall paneling (the safest in the level of chemicals, environmentally friendly);

• OSB - oriented strand board.

first two options are waterproofed and have in their composition HYDROSTOP.

These options allow you to achieve a smooth, without roughness, the surface of the walls of the attic.Consider a couple of the most common and popular options.

Finishing attic gypsum boards

following the order of actions:

1. Choosing and buying sheets.Plasterboard sheets are made of different colors, quality, have their own characteristics.Finishing implies a choice of lofts moisture resistant sheets with a thickness of 1.25 centimeters (allowed and thickness with a high index).
2. Prepare metal profiles (aluminum) or steel crate-frame.Mount them on the suspension with a convenient mounting system.
3. Plasterboard sheets are screwed to the profiles with screws.

1. gap between the gypsum board and profile, the frame is filled with insulated material.In this case, the mineral wool.

Important note: the use of the aforementioned profile helps to reduce the height of the ceiling.

certain screws are applied at finishing the attic.Between the sheets is recommended to leave a gap in half a centimeter.Places of screws is zashpatlevat acrylic material.This process can be done with the space between the sheets of plasterboard.

After installing plasterboard walls line the attic (overwritten).They can be painted or wallpaper paste.

Choice finishing the attic in the country in favor of a wooden lining

Wooden wall paneling - eco-friendly and easy to handle material.It is often used on suburban buildings.Decoration is kind of a natural tree.It applies lining of the various types of wood.The only negative - before using the strips of wood is carefully processed, adding extra processes attic finishing.It is coated with a protective varnish, paint (depending on preference).Fixing lining occurs on pre-designed layers of plywood.

requested to follow the instructions:

1. Purchase of the necessary material.Recommend to use the following types of wood:

• fir;
• spruce;
• ash;
• maple.

2. Select the board in the average thickness of 10 centimeters, and the width should be around 15 centimeters.Connect the board through the slot and dowel technology.

3. The walls are sheathed with a section of rails, on average, 0.3 centimeters.It will be framed.Sheathing comes with nails, strips gap is directly proportional to the parameters of the wooden bunks.On the slopes of the roof spaces - within half a meter.

4. Every two feet frame must contain ventilation holes.

5. Wooden wall paneling mounted on the frame of the attic stapled.You can use nails.Trying to drive them in the comb.

6. If the tree was not treated prior to installation, it is already on the wall be sure to cover the walls of the attic in the country means of protection from drying and damage:

- Oil;

- Stain;

- Luck.