As the ceilings are constructed of drywall ?

Suspended ceilings of plasterboard in step

planning Even before you are thinking of buying the materials necessary to design a future ceiling, whether it is an ordinary plane, or a multi-level structure.And, whatever decision you have taken, you need precise calculation and correct marking of points where profiles will be laid and secured suspensions.

Ideally area sheets should be identical quadrature ceiling, and if the walls are finished with gypsum boards, in the light of the lining .The profiles of the frame which is going to are used in two ways - as the main bearing and the difference between them consists only in that one is attached to the ceiling, and the second mounted facing sheet.

However, this is not all the elements that are necessary in order to obtain a reliable false ceilings made of plasterboard.You will need to guide profiles, numerous connectors for installation, as well as various self-tapping screws and plastic plugs for them.

How to make plasterboard ceilings with lighting?

Appointment suspended ceiling is not only the surface of the lining overlap, they are also used to hide the wiring and other utilities.And it is very convenient if you need plasterboard ceilings with lighting.

No matter how many fixtures you want to install on the ceiling structure, each of which must be supplied by two wires that are being hidden lining, will not spoil the overall design space.

When counting ceiling and gypsum board is made, it is necessary beforehand to make holes for the lights, as the trim cut after completion of the entire construction assembly is inconvenient.Propylene made any special attachment "crown" type drill, jigsaw, or if the tool you'd better sign.

important that the hole fits the diameter of the lighting element, which is fixed by means of springs attached to his body (pressing them, insert the lamp into the socket, then release the tabs).

Installing ceiling plasterboard with their hands

method ceiling fixture to the bottom of the frame depends entirely on the material in which you will make holes for fasteners.For example, if it is a concrete slab, ceiling plasterboard installation begins with the perforating holes special plastic plugs, intended for fastening padlocks to constructions bearing walls and floors of solid section.Typically, this anchor anchor or anchor-wedge.

For wooden bases used puncturing or piercing self-tapping screws without plastic dowels.This is followed by the installation of hangers, which fasten the main profiles, fixed on the perimeter rails mounted on the wall.

For bonding profiles with each other there is no need in their perforation as special screws (piercing and piercing LN LB) perfectly break through a thin-walled metal .

If there is a need for light fixture frame element to the first level of drywall, you can use the plug MJP with self-tapping screws.

The next step depends on whether your ceiling single or duplex.In the first case we can restrict connection profiles in the same plane with special cross-shaped elements.The second option involves the use of split-level or single-sided connector for securing support profiles to the main.In this case, you can use vertically mounted short profile sections to create three-dimensional figures and tiered structures.